Philips Kvaser LAPcan II manual Power is required

Kvaser LAPcan / LAPcan II Hardware Guide			15(19)
7	Red	CAN_H (high level @ dominant)
8	N/A	Not connected.
9	Yellow	External power, 6-36V.

Here is the pin configuration for the DRVcan-S:

D-SUB pin	Colour code	Function
number
1	N/A	Not connected.
2	Green	Not connected.
3	Brown	GND
4	Orange	Reserved, do not connect.
5	Black	Shield
6	N/A	Not connected.
7	Red	CAN_H (high level @ dominant)
8	N/A	Not connected.
9	Yellow	Power supply (nominal +12V DC; fully
		functional between +7.5 and +18 V DC.)
		Power is required.
Pins 3 and 4	are protected by 250 mA fuses.
Here is the pin configuration for the DRVcan LIN:
D-SUB pin	Colour code	Function
number
1	N/A	Not connected.
2	Green	Not connected.
3	Brown	GND
4	Orange	LIN bus
5	Black	Shield
6	N/A	Not connected.
7	Red	Reserved, do not connect.
8	N/A	Not connected.
9	Yellow	Power supply (nominal +12V DC; fully
		functional between +7 and +18 V DC.)
		Power is required.
	Kvaser AB, Mölndal, Sweden — www.kvaser.com