Troubleshooting, Other Notes, Specifications

Troubleshooting

Before requesting service, please try the following solutions:

	The unit will not turn on.	Sound is not produced in AUX mode.
	• Connect the power plug to the outlet.	• Check the power of the external device and
	• Your player will not turn on if the battery is	whether the music is playing or not.
	completely drained. Recharge the battery	• Make sure the AUX mode is selected.
	and turn the player on again.	• Check if the audio cable is connected
	• Check if the battery is discharged.	properly.
	A function does not work when the button	• Turn up the volume of the product/external
	is pressed.	device.
	• Disconnect the power plug and connect it
	again.	The SoundShare (TV pairing) failed.
	• Check if the buttons correspond to the	The SoundShare (TV pairing) failed.
	• Check if the buttons correspond to the	• Check whether your TV supports
	functions you want to activate.	• Check whether your TV supports
	functions you want to activate.	SoundShare. (http://www.samsung.com)
	Sound is not produced.	SoundShare. (http://www.samsung.com)
	Sound is not produced.	• Check whether your TV has the latest
	• Make sure the unit is properly connected.	firmware.
	• Check if the Mute function is on.	• Reset the unit.
	• Check if the volume is set to minimum.	• If the function doesn't work even though
	The power of the unit is off.	the connection is completed, contact the
	• The unit automatically turns off in the	Samsung call center.
	following situations.
	-- If there is no KEY input for 8 hours whenThe Wireless Audio Portable may not search

Other Notes

About the Battery

•If the battery is nearly discharged, red indicator begins to blink and eventually turned off.

•If the battery has insufficient charges, pressing the power button does not turn on the product. Instead, the battery indicator blinks red a few times and turns off.

•While the battery indicator is blinking, all other buttons will not work.

•If the battery is fully discharged, all function, volume and bass settings are initialized.

About NFC

•NFC tagging for Bluetooth connection cannot be established while powering on and off.

•NFC tagging for Bluetooth connection will not work while the battery indicator is blinking.

About Automatic Bluetooth Connection

•When switching to Bluetooth mode or powered up in Bluetooth mode, the last Bluetooth connection will be restored automatically if available. Automatic Bluetooth connection attempt will abort after 1 minute.

•Within the automatic connection trial, connection to another Bluetooth device can be limited. To connect to a different Bluetooth device, switch the product’s Bluetooth mode to pairing mode. (See page 3.)

	the cable is connected in AUX mode.	or connect properly in the following cases.
	-- If the AUX cable in AUX mode is
		• If there is a strong electrical field around
	disconnected for 25 minutes.
		the Wireless Audio Portable.
	-- If the Bluetooth or SoundShare mode
		• If several Bluetooth devices are simultaneously
	has been disconnected from this unit for
	25 minutes.	paired to the Wireless Audio Portable.
		• If the Bluetooth device is turned off, not in
	-- It does not turn off when the smart
		place, or malfunctions.
	phone is charging.

Specifications

Model name : DA-FM61C

Power supply : DC 14V 2.5A

Power consumption : 23W

Weight : 2.42 Ibs

Dimensions (W x D x H) :

8.8x 1.8 x 5.2 inches Operating temperature range : +41°F to +95°F

Operating humidity range : 10 % to 75 %

-- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. -- Weight and dimensions are approximate.

-- Open the rear cover to check the label.

English 5