fYou may be required to enter a PIN code (password) when connecting the Bluetooth device to the Wireless Audio Portable. If the PIN code input window appears, enter <0000>.
fThe Wireless Audio Portable supports SBC data (44.1kHz, 48kHz).
fThe AVRCP feature is not supported.
fConnect only to a Bluetooth device that supports the A2DP (AV) function.
fYou cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.
fOnly one Bluetooth device can be paired at a time.
connectIng an audIo deVIce usIng auX In
This section explains how to connect the unit to an audio device. This unit requires one audio analog jack for connecting to an audio device.
| SERVICE |
| 5V 500mA |
| AUX IN |
| DC 14V 2.5A |
Earphones | Audio Cable |
jack | (not supplied) |
External device
Press the FUNC. button to select AUX function.
fBefore moving or installing this product, be sure to turn off the power and disconnect the power cord.
usIng the soundshare FunctIon
This section explains how to connect the Wireless Audio Portable to Bluetooth compatible SAMSUNG TVs.
Connect
1.Turn on the Samsung TV and Wireless Audio Portable.
•Set 'Add New Device' to 'On' in the TV's 'SoundShare Settings' menu. (Refer to the TV's user manual for details.)
2.Press the FUNC. button to change the mode of the Wireless Audio Portable to 
. A message asking whether to proceed with Bluetooth pairing appears.
•The 
blinks in the standby mode.
3.Select <Yes> on the TV screen. The Wireless Audio Portable pairs with the TV.
•The 
indicator blinks, and then stops blinking.
•The Wireless Audio Portable Bluetooth pairing is complete.
•If you want to cancel an existing pairing and pair the Wireless Audio Portable to another TV, press the FUNC.
button for 3 seconds with the unit in 
mode.
fSoundShare is supported by some Samsung TVs released after 2012. Check whether your TV supports SoundShare before you begin.
fOptimal pairing distance is 3.3 feet or less.
soFtWare uPgrade
Samsung may offer upgrades for the Wireless Audio Portable's
system fi rmware in the future.
If an upgrade is offered, you can upgrade the fi rmware by connecting
a USB drive with the fi rmware upgrade stored on it to the Service (USB) port on your Wireless Audio
Portable.
Please visit Samsung.com to receive more information about downloading upgrades fi les.
To upgrade after you have downloaded the fi rmware, follow these steps:
1.Turn on the product.
2.Insert a USB drive containing the fi rmware upgrade into the
Service (USB) port on the back of the product.
3.Press the FUNC. and 
buttons for 5 seconds at the same time. The update process starts.
•All LEDs indicators will blink during the update process.
4.The LEDs will turn off automatically after the update process is complete.
•Do not disconnect the power or remove the USB drive while upgrades are being applied.
•The product will turn off automatically after completing the fi rmware upgrade.
•When fi rmware is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
•When the battery indicator LED is red, do not update the product. Doing so could cause the product to malfunction.
fIf the fi rmware fails to upgrade, we recommend formatting the USB drive in FAT16 and trying again.
fFor upgrading purposes, do not format the USB drive in
NTFS format because it is not a supported fi le system.
fDepending on the manufacturer, the USB may not be supported.