Programming Additional Units
EN
program the extension unit again. If you do not intend to program the extension unit, unplug the extension unit, and plug it back in to restore a solid green indicator light.
4.When you have finished programming the extension units, press the button on the right side of the base unit.This takes the base unit out of program mode and the indicator light turns green. Ensure the indicator lights on the base and extension units are solid green.
NOTE: If you forget to press the button on the base unit after programming the extension units, the base unit will remain in program mode for five minutes and then return to normal operating mode. After five minutes, the base unit’s indica tor light returns to solid green.
11