EN
6
Getting Started
The package should contain the items listed below. If any of these items are not included, notify the shipper or dealer from which you purchased the product.
Base Unit
The base unit has two phone connectors on the right side (one labeled PHONE, the other labeled LINE), an indicator light on the bottom, right corner and a push button on the bottom, right side. It is also labeled BASE on both the voice/data and
Extension Unit
The extension unit has a single phone connector on the right side, an indicator light on the bottom, right corner and a push button on the bottom, right side. It is also labeled EXTENSION on both the voice/data and
Six-Foot Telephone Cord
A
System Setup
System Setup
Follow the steps below to ensure proper functionality of your Philips Wireless Phone Jack.
Installation
1.Plug the base unit (two phone connectors) into an electrical outlet near an established wall phone jack.
NOTE: Do not plug base or extension unit into surge protectors, plug strips, extension cords, other A/C power extension devices or GFCI protected outlets.The equipment works best when plugged directly into electrical outlets.
NOTE: The indicator light on the base unit will illuminate red, once it has been plugged into the electrical outlet.