Test

System Setup

2.Insert one end of the provided six-foot phone cord into a functioning wall phone jack. Plug the other end of same phone cord into the phone connector on the base unit labeled LINE.

3.After you have plugged the base unit into an electrical out- let, plug the extension unit into an A/C outlet where you desire connection.

NOTE: The indicator light on the extension unit will blink red. As soon as it recognizes the base unit, the indicator light will then illuminate green. The indicator light on the base unit will illuminate green as well, just after it has recognized the

extension unit.

4.Your wireless phone jack is now ready for use.

1.To ensure you have completed the installation successfully, use a handset phone cordless phone or a phone-line testing device to help verify your extension unit has a dial tone.

NOTE: The indicator light on base and extension units will blink green when the handset connected to the extension unit is taken off hook.

2.Plug your chosen handset telephone, cordless telephone or phone-line testing device into the single phone connector on your extension unit, and check for a dial tone. Is there a dial tone? If so, you have successfully set up the link between the base and extension units.