Philips ISP1362 manual Installation, Application Modules, Porting Modules

Page 8

Philips Semiconductors

ISP1362 Linux Stack User’s Guide

product-specific. Therefore, this driver communicates with a mass storage bridge (portable). For more information on the device stack interface, refer to API ISP1362 Device Stack.

2.3.3.OTG Stack

The OTG stack consists of the OTG driver. This driver maintains the OTG software FSM, and coordinates the host and device functionality switching. It interfaces with OTG applications through the Linux file system. For more information on this interface, refer to API ISP1362 OTG Stack.

2.4.Application Modules

2.4.1.Mass Storage Disk Emulation

This module is an application module and emulates a physical disk. It responds to a minimal set of SCSI-II commands, and uses a file system interface to store the physical disk data. This is developed for the OTG mass storage demo purpose.

2.4.2.OTG Applications (OTG Mass Storage Demo/OTG Tools)

There are two OTG applications:

•A GUI-based application (for PC evaluation kits only)

•A command-line-based application

These applications are used to test the OTG mass storage functionality. These are written for the demo.

2.5.Porting Modules

2.5.1.Hardware Access Layer Driver

The core modules of the ISP1362 (Host Controller Driver, Device Controller Driver and OTG driver) communicate with the ISP1362 hardware through this driver. Since hardware access is mostly platform-dependent, this module must be ported to the target platform. This driver provides an interface to the ISP1362 registers and buffers, to the ISP1362 I/O ports and interrupts, and configures the ISP1362 based on the platform.

2.5.2.Mass Storage Bridge

As physical storage disk is specific to the product, a mass storage bridge is needed. Also, as the mass storage disk is an emulator in the application space, this layer provides an interface to the application module. You need to port this layer to interface with the physical disk driver (kernel/application).

3. Installation

The ISP1362 evaluation boards are available in the following platforms:

•ISP1362 PCI evaluation kit

•ISP1362 ISA evaluation kit

•ISP1362 add-on card for Intel PXA250-based Accelent® IDPTM.

The ISP1362 Linux stack currently supports the ISP1362 PCI evaluation kit and ISP1362 add-on card for Accelent IDP. Support for other platforms will soon be added to the stack. The same source code will work for all platforms by changing the compile time options. The following diagram shows the evaluation kit setup example for the ISP1362 Linux stack.

UM10012-_2

 

© Koninklijke Philips Electronics N.V. 2003. All rights reserved.

User’s Guide

Rev. 1.2—July 2003

8 of 34

Page 7 Page 9
Image 8
Page 7 Page 9
Contents UM100122 ISP1362 Linux Stack Version Date Description AuthorDisclaimer Contents Philips Semiconductors Figures Introduction ConceptDevice Stack Core ModulesHost Stack Porting Modules InstallationApplication Modules Setting Up the PC and OS Setting Up the ISP1362 Evaluation KitSetting Up the Software ISP1362 PCI Evaluation KitAny other USB options that need to be enabled ISP1362 Add-on Card for Intel PXA250 based Accelent IDP Rev Setting Up the ISP1362 Add-On CardHost PC Setup #tar Ixvf arm-linux-gcc2953.tar.bz2 Accelent IDP Rev 04 Target Setup USB Catc USB Kawth#cd /home/1362/objs #./imod Development setup for Intel PXA250 Based Accelent IDP Armtoolchaintar.bz2 Linux Kernel Configuration Accelent IDP Setup Operating the ISP1362 Linux Stack Loading the StackUnloading the Stack Loading the StackUnloading the Stack Initializing the StackISP1362 Host Stack Closing the ISP1362 StackHost Stack Evaluation Example Setup ISP1362 Device StackOTG Stack Evaluation Setup ISP1362 OTG StackOTG Mass Storage Application in the Idle State Snapshot OTG Application File Selection Snapshot Option Description Unloads OTG modulesOTG B device accessing remote OTG mass storage device files OTG B closing the session after connected device data access 10 Operations with OTG a and B devices Configuration Compilation FlagsGlobal Compilation Flag DescriptionInside the ISP1362 Linux Stack Top-Level DirectoryHost DeviceOtg PdcDevmscd DiskemuHal Appl1. x86pci OtgmsdemoTools ReferencesObjs Philips Semiconductors Koninklijke Philips Electronics N.V

ISP1362 specifications

The Philips ISP1362 is a highly versatile USB controller that serves as a key component in various electronics and computing devices. Known for its robust features and efficient design, the ISP1362 has gained popularity in applications ranging from consumer electronics to embedded systems.

One of the standout features of the ISP1362 is its support for both USB 1.1 and USB 2.0 standards. This dual compatibility allows devices utilizing the ISP1362 to connect seamlessly with a wide range of peripherals, ensuring flexibility for developers and users alike. The chip can efficiently handle data transfer rates of up to 12 Mbps in USB 1.1 mode and 480 Mbps in USB 2.0 mode, catering to fast data exchange demands in modern applications.

The ISP1362 integrates an advanced architecture with a built-in microcontroller unit, reducing the need for additional external components. This facilitates easier design and integration into various embedded systems, simplifying the development process for engineers. Its compact design is optimized for low power consumption, making it an ideal choice for battery-operated devices.

In terms of technological features, the ISP1362 is equipped with enhanced error detection capabilities. This ensures accuracy and reliability during data transmission, which is crucial for maintaining data integrity, especially in applications demanding high availability and performance.

The chip also incorporates a flexible pipeline for USB protocol handling, which enables it to manage multiple data streams efficiently. This feature is particularly beneficial in complex systems where various peripherals may be communicating simultaneously, allowing for improved system responsiveness and overall performance.

Moreover, the ISP1362 supports the use of different USB classes, including Mass Storage and Human Interface Devices (HID), providing developers with the versatility needed for a broad spectrum of applications. Its compliance with industry standards ensures compatibility and reduces integration times, making it a preferred choice for many manufacturers.

Overall, the Philips ISP1362 stands out with its combination of high-speed connectivity, power efficiency, and robust functionality, making it an excellent option for engineers and developers looking to implement USB connectivity in their designs. Whether in consumer electronics, automotive applications, or industrial devices, the ISP1362 continues to be a reliable USB interface solution that meets modern performance demands.
Top Page Image Contents