Philips PT-LB51SU manual Lamp Runtime, Power OFF Timer, Auto Setup, Signal Search, Direct Power on

Page 35

OPTION menu

LAMP RUNTIME

You can check how long the lamp has been used.

NOTE:

•LAMP RUNTIME is a relevant matter for lamp replacement timing. See “Replacing the Lamp unit” on page 41.

POWER OFF TIMER

You can set the off timer to switch off the POWER of the projector after a certain period of time automatically when no signal is detected. Press I H to select the required period from 15 to 60 minutes at intervals of

5 minutes.

AUTO SETUP

You can turn off the AUTO SETUP function for when the COMPUTER signal is detected.

AUTO

When the projector detect a

 

COMPUTER signal, adjust the

 

projected image position

 

automatically for SIGNAL SEARCH,

 

DOT CLOCK and CLOCK PHASE.

BUTTON

Only when the AUTO SETUP button

 

is pressed, the projected image

 

position will be adjusted for DOT

 

CLOCK and CLOCK PHASE. See

 

“Remote control” on page 10.

NOTE:

• Usually the recommended setting is AUTO.

DISABLE

SIGNAL SEARCH

 

15 MIN.

 

 

 

 

60 MIN.

You can turn off the auto signal detecting system.

 

 

 

 

 

 

 

 

 

 

 

ON

Detect the input signal from the

 

 

 

 

 

 

 

 

 

 

 

20 MIN.

 

 

 

 

55 MIN.

 

terminals and project the image.

 

 

 

 

 

 

 

 

 

 

 

OFF

Deactive

 

 

 

 

 

 

 

 

 

 

 

25 MIN.

 

 

 

 

 

 

50 MIN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30 MIN.

 

 

 

 

 

 

45 MIN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35 MIN.

 

 

 

 

 

 

40 MIN.

 

 

 

 

 

 

 

 

 

 

 

 

DIRECT POWER ON

You can switch the projector start up status for when the Power cord is connected. Press I H to select the required option.

OFF

The projector will start from the

 

standby mode or the projecting

 

mode.

 

(The projector will start from the

 

same status as when the power cord

 

was disconnected.)

ON

The projector will start from the

 

projecting mode.

NOTE:

•When the projector is started from the projecting mode, pressing the POWER button procedure is skippable.

CONTROL PANEL

You can turn off the function of the control panel buttons on the projector body. Press I H to select the required option.

INVALID

Invalidate the control panel buttons

 

Confirmation screen will be

 

displayed.

VALID

Validate the control panel buttons

NOTE:

•SIGNAL SEARCH is not available when any input signal is projecting.

•Usually the recommended setting is ON.

INSTALLATION

When installing the projector, select the projection method according to the projector position. Press I H to cycle through the options. See “Projection method” on page 16.

FRONT/DESK

Setting on a desk/floor and

projecting from front

 

FRONT/CEILING

Mounting in the ceiling and

projecting from front

 

REAR/DESK

Setting on a desk/floor and

projecting from rear

 

REAR/CEILING

Mounting in the ceiling and

projecting from rear

 

 

 

Settings

ENGLISH - 35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents PT-LB51U PT-LB51SU Model number PT-LB51NTU / PT-LB51U / PT-LB51SU Important Safety NoticePanasonic Important Safety NoticeDeclaration of Conformity Model Number PT-LB51NTU / PT-LB51U / PT-LB51SU Trade NameContents Appendix SettingsMaintenance Precautions with regard to safety Use only the specified batteries Precautions with regard to safetyDo not set up the projector outdoor Do not look into the lens while the projector is being usedDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Accessories About Your Projector Remote controlControl to adjust the volume of the speakers. Battery compartmentAttaching a hand strap About Your ProjectorControl panel Projector bodyTop and front view Back and bottom view Connector PanelProjection size 4 Throw distance L Height Screen Setting upScreen size and throw distance Projected image ScreenSetting up Calculation methods for screen dimensions Mounting in the ceiling and projecting from rear Setting upProjection method Mounting in the ceiling and projecting from frontFront adjustable legs and throwing angle Before connection to the projector Connecting with computersConnections Connections Connecting with AV equipmentConnecting with Video IN/S-VIDEO Connecting with ComponentPower indicator Switching the projector on/offPower cord Plug the Power cord into the projector Switching on the projectorSwitching off the projector Switching the projector on/offPositioning the image Selecting the input signalProjecting an image Facing to the projector Remote control operationSetting up the image position automatically Operating rangeStopping the projection temporary Switching the input signalCapturing an image Changing the image size Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Switching the positionShifting the center point Controlling the volume of the speakerEnlarging the centered area Enlarging the imageNavigating through the Menu Menu NavigationMenu Navigation Main menu and Sub-menuOnly Live Mode CUT Status InitializeSee CD-ROM contents for detailed information Picture menu Daylight View Detailed SetupFor RGB signals For S-VIDEO/VIDEO signalsPosition menu Frame Lock S1 video signalsLanguage menu ResizingOption menu Direct Power on Power OFF TimerAuto Setup Signal SearchSolid blue You can perform more detailed setting in various itemsHighland Semi transparent blackText Display Password ChangeInput Password Security menuWireless menu, the following items are available Items in Wireless menuTemp indicator TEMP, Lamp IndicatorsManaging the indicated problems Lamp indicatorReplacing the air filter Care and ReplacementCleaning the projector Before replacing the Lamp unit Care and ReplacementWhen to replace the Lamp unit Replacing the Lamp unitHandles lamp unit fixing screws Lamp unit cover Lamp unit cover fixing screwsTroubleshooting Technical Information List of compatible signalsSerial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidance Manufacturer Key commandSpecifications Variable Audio OUTAudio Computer AudioDimensions Trademark acknowledgments Index Index Numéro de série Avis important concernant la sécuritéPT-UX71NT/PT-UX71 Déclaration de conformité Avis important concernant la sécuritéAvertissement AdvertenciaAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeSinon cela peut causer des chocs électriques Précautions lors du transportUtiliser uniquement les piles spécifiées Ne pas mélanger des piles usées et des piles neuvesÉcran Précautions lors de linstallationPrécautions lors de lutilisation Affichage à cristaux liquidesAvant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Poignées Vis de fixation du bloc de lampe Remplacement de lunité de la lampe Procédure de remplacementTechnical Support Panasonic Projector Systems Company

PT-LB51SU specifications

The Philips PT-LB51SU is a versatile and compact projector that stands out in the world of presentation technology. Designed with the needs of professionals and educators in mind, this model combines excellent performance with user-friendly features, making it an ideal choice for both small conference rooms and classroom environments.

One of the main features of the PT-LB51SU is its impressive brightness level of 3000 lumens, which ensures vibrant and clear image quality even in well-lit conditions. This brightness makes it suitable for a variety of settings, eliminating the need to dim lights for optimal viewing. Coupled with a native XGA (1024 x 768) resolution, users can expect sharp text presentation and detailed graphics, enhancing the overall viewing experience.

The PT-LB51SU employs advanced DLP technology, which provides deeper blacks and enhanced color accuracy. This results in lifelike images that captivate audiences and convey information effectively. Additionally, the projector boasts an impressive contrast ratio, ensuring that shadows and highlights are rendered with remarkable detail.

Portability is another key characteristic of the PT-LB51SU. Weighing just over 2 kg, it is lightweight and easy to carry, making it an excellent choice for professionals who need to deliver presentations in different locations. The compact design allows for easy setup and operation, reducing the time required to get ready for a presentation.

Connectivity is also a strong point for the PT-LB51SU. It features multiple input options, including HDMI, VGA, and USB ports, ensuring compatibility with a wide range of devices like laptops, tablets, and DVD players. This flexibility allows users to connect effortlessly, catering to diverse presentation needs.

Moreover, the projector is equipped with an eco-friendly design, incorporating energy-saving features that extend lamp life, which can last up to 5,000 hours. This not only reduces maintenance costs but also decreases the environmental impact.

In conclusion, the Philips PT-LB51SU is a powerful yet compact projector that excels in brightness, portability, and connectivity. With its advanced technologies and user-oriented features, it serves as a reliable tool for anyone looking to make impactful presentations in various settings. Whether in a business meeting or an educational environment, the PT-LB51SU ensures that information is delivered with clarity and effectiveness.
Top Page Image Contents