Philips PT-LB51SU Replacing the Lamp unit, Care and Replacement, Before replacing the Lamp unit

Page 41

Care and Replacement

Replacing the Lamp unit

Before replacing the Lamp unit

Disconnect the power cord plug from the wall outlet.

Make sure the Lamp unit and the surroundings are cooled enough. Prepare a Phillips-head screwdriver.

Contact an Authorised Service Center to purchase a replacement Lamp unit (ET-LAB50).

When the projector is mounted in the ceiling, do not work directly under the projector or put your face closer to the projector.

NOTE:

•Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.

•Do not attempt replacement with an unauthorised lamp unit.

When to replace the Lamp unit

The Lamp unit is a consumable product. Even when the full life of the bulb has not been exhausted, the brightness of the light will gradually decline. Therefore periodic replacement of the lamp is necessary. The intended lamp replacement interval is 2 000 hours, but it is possible that the lamp may need to be replaced earlier due to variables such as a particular lamp’s characteristics, usage conditions and the installation environment.

Early preparation for lamp replacement is encouraged.

The lamp will automatically shut off after approximately 10 minutes when 2 000 hours of use have been reached because of a much greater chance of it exploding after this time.

On screen

LAMP indicator

Indication

REPLACE LAMP

Over 1 800 hours

“REPLACEMENT LAMP” is displayed on

 

the upper left of the screen for 30 seconds.

 

 

 

 

 

 

 

“REPLACEMENT LAMP” is displayed on

Illuminates RED.

 

the upper left of the screen, and it will stay

Over 2 000 hours

 

until you respond.

 

 

 

 

To clear the screen, press any button.

 

NOTE:

•The usage hours explained above are for when “LAMP POWER” in the “OPTION” menu has been set to “STANDARD” and when “AI” in the “PICTURE” menu has been set to “OFF”. If “LAMP POWER” is set to “ECO-MODE”, or “AI” is set to “ON”, the life of the lamp can be extended.

•While 2 000 hours is the intended replacement interval, it is not a period of time covered by warranty.

Replacement procedure

NOTE:

•If the lamp usage time has passed 2 000 hours (when “LAMP POWER” has een set to “STANDARD” and when “AI” has been set to “OFF”), the projector will switch to standby mode after approximately 10 minutes of operation. The steps 7 to 12 should thus be completed within 10 minutes.

1.Disconnect the Power cord from the projector (See “Power cord” on page 20), and check that the area around the Lamp unit has cooled down.

Maintenance

ENGLISH - 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents PT-LB51U PT-LB51SU Model number PT-LB51NTU / PT-LB51U / PT-LB51SU Important Safety NoticeDeclaration of Conformity Important Safety NoticeModel Number PT-LB51NTU / PT-LB51U / PT-LB51SU Trade Name PanasonicContents Appendix SettingsMaintenance Precautions with regard to safety Do not set up the projector outdoor Precautions with regard to safetyDo not look into the lens while the projector is being used Use only the specified batteriesDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Accessories Control to adjust the volume of the speakers. Remote controlBattery compartment About Your ProjectorAttaching a hand strap About Your ProjectorControl panel Projector bodyTop and front view Back and bottom view Connector PanelScreen size and throw distance Setting upProjected image Screen Projection size 4 Throw distance L Height ScreenSetting up Calculation methods for screen dimensions Projection method Setting upMounting in the ceiling and projecting from front Mounting in the ceiling and projecting from rearFront adjustable legs and throwing angle Before connection to the projector Connecting with computersConnections Connecting with Video IN/S-VIDEO Connecting with AV equipmentConnecting with Component ConnectionsPower indicator Switching the projector on/offPower cord Switching off the projector Switching on the projectorSwitching the projector on/off Plug the Power cord into the projectorPositioning the image Selecting the input signalProjecting an image Setting up the image position automatically Remote control operationOperating range Facing to the projectorStopping the projection temporary Switching the input signalCapturing an image Projecting an image in INDEX-WINDOW mode Resetting to the factory default settingsSwitching the position Changing the image sizeEnlarging the centered area Controlling the volume of the speakerEnlarging the image Shifting the center pointNavigating through the Menu Menu NavigationMenu Navigation Main menu and Sub-menuOnly Live Mode CUT Status InitializeSee CD-ROM contents for detailed information Picture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Daylight ViewPosition menu Language menu S1 video signalsResizing Frame LockOption menu Auto Setup Power OFF TimerSignal Search Direct Power onHighland You can perform more detailed setting in various itemsSemi transparent black Solid blueInput Password Password ChangeSecurity menu Text DisplayWireless menu, the following items are available Items in Wireless menuManaging the indicated problems TEMP, Lamp IndicatorsLamp indicator Temp indicatorReplacing the air filter Care and ReplacementCleaning the projector When to replace the Lamp unit Care and ReplacementReplacing the Lamp unit Before replacing the Lamp unitHandles lamp unit fixing screws Lamp unit cover Lamp unit cover fixing screwsTroubleshooting Technical Information List of compatible signalsSerial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidance Manufacturer Key commandSpecifications Audio OUTComputer Audio Variable AudioDimensions Trademark acknowledgments Index Index Numéro de série Avis important concernant la sécuritéPT-UX71NT/PT-UX71 Avertissement Avis important concernant la sécuritéAdvertencia Déclaration de conformitéAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeUtiliser uniquement les piles spécifiées Précautions lors du transportNe pas mélanger des piles usées et des piles neuves Sinon cela peut causer des chocs électriquesPrécautions lors de lutilisation Précautions lors de linstallationAffichage à cristaux liquides ÉcranAvant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Poignées Vis de fixation du bloc de lampe Remplacement de lunité de la lampe Procédure de remplacementTechnical Support Panasonic Projector Systems Company

PT-LB51SU specifications

The Philips PT-LB51SU is a versatile and compact projector that stands out in the world of presentation technology. Designed with the needs of professionals and educators in mind, this model combines excellent performance with user-friendly features, making it an ideal choice for both small conference rooms and classroom environments.

One of the main features of the PT-LB51SU is its impressive brightness level of 3000 lumens, which ensures vibrant and clear image quality even in well-lit conditions. This brightness makes it suitable for a variety of settings, eliminating the need to dim lights for optimal viewing. Coupled with a native XGA (1024 x 768) resolution, users can expect sharp text presentation and detailed graphics, enhancing the overall viewing experience.

The PT-LB51SU employs advanced DLP technology, which provides deeper blacks and enhanced color accuracy. This results in lifelike images that captivate audiences and convey information effectively. Additionally, the projector boasts an impressive contrast ratio, ensuring that shadows and highlights are rendered with remarkable detail.

Portability is another key characteristic of the PT-LB51SU. Weighing just over 2 kg, it is lightweight and easy to carry, making it an excellent choice for professionals who need to deliver presentations in different locations. The compact design allows for easy setup and operation, reducing the time required to get ready for a presentation.

Connectivity is also a strong point for the PT-LB51SU. It features multiple input options, including HDMI, VGA, and USB ports, ensuring compatibility with a wide range of devices like laptops, tablets, and DVD players. This flexibility allows users to connect effortlessly, catering to diverse presentation needs.

Moreover, the projector is equipped with an eco-friendly design, incorporating energy-saving features that extend lamp life, which can last up to 5,000 hours. This not only reduces maintenance costs but also decreases the environmental impact.

In conclusion, the Philips PT-LB51SU is a powerful yet compact projector that excels in brightness, portability, and connectivity. With its advanced technologies and user-oriented features, it serves as a reliable tool for anyone looking to make impactful presentations in various settings. Whether in a business meeting or an educational environment, the PT-LB51SU ensures that information is delivered with clarity and effectiveness.
Top Page Image Contents