Philips DTR4610/28 Product description, Front view, Status Indicator Table, Product Description

3 Product description

3.1 Front view

1 2 3

English

1	Smartcard slot		4	5	6		7
		Switch the receiver on or to "low power".
2	LOW POWER button:
3	TV/RADIO button:	Toggle between digital TV and digital radio.
4	"-" button:	Channel down.
5	Bicolour LED:	Display receiver status (see status indicator table).
6	Red LED	Display receiver status (see status indicator table).
7	"+" button:	Blink at remote control command reception.
		Channel up.
STATUS INDICATOR TABLE
	Mode	Indicator	Bicolour LED			Red LED
	Low power						red
	Standby		orange
	TV/Radio mode		green
	Download in progress				Blinking red
	Timer active when receiver on		green				red
	Timer active when receiver in standby		orange				red

Note: if the red LED is blinking while your receiver is in "Standby", it indicates that an update of your receiver software is taking place. Do not interrupt this operation. Wait for the green LED to light up, indicating successful update, and then continue as normal.

Your receiver, as any electronic equipment, consumes power. In order to reduce power consumption, please switch your receiver to either Standby or "Low Power" whenever you are not using it. For maximum energy saving we recommend you switch off the receiver by unplugging it from the mains if you are not using it for a long time.

6 PRODUCT DESCRIPTION