16OPERATING INSTRUCTIONS
ADDING RINSE AID TO THE DISPENSER
The Low Rinse Aid indicator will appear in the display when more rinse aid is needed.
The use of rinse aid is recommended to prevent water droplet spots on dishes and to enhance the drying performance.
NOTE
Only use liquid rinse aid in the dishwasher.
1 | Push button to open lid. |
|
2 | Add a liquid rinse aid to the maximum fill level. When |
| filling the rinse aid dispenser, aim the rinse aid at the |
arrow. Make sure that the rinse aid is settled in the dispenser while filling.
3 | Close the lid to lock the dispenser. Rinse aid will be |
| dispensed automatically during the final rinse cycle. |
RINSE AID DISPENSER ADJUSTMENT
Rinse-Aid
Indicator
Adjust Lever (Rinse)
The rinse aid dispenser is set to level 3, which should provide the best performance under most conditions. Adjust the setting higher if you have hard water and notice calcium buildup on your dishes.
If you notice film on your dishes, use a lower setting. Setting the rinse aid control too low will contribute to spotting and streaking of dishes and poor drying performance. Setting the control too high can cause foaming, which will cause poor wash performance.
To adjust the rinse aid dispenser setting, remove the cap and ad- just the rinse aid lever to the desired setting. Point the arrow to the left for a lower setting, right for a higher setting.
REFILLING THE RINSE AID
The regularity of the dispenser needing to be refilled depends on how often dishes are washed and the rinse aid setting used. If the rinse aid level is low, the Rinse Aid light on the control panel will illuminate.
RINSE AID FILLING TIPS:
yy 
The Low Rinse Aid indicator will appear in the display when more rinse aid is needed.
yy Do not overfill the rinse aid dispenser.
yy Clean up any spilled rinse aid to prevent sudsing.
