Philips PPX1430 user manual Video playback USB/SD card/internal memory, File format

Page 14

7 Video playback

Video playback (USB/SD card/internal memory)

1Switch the device on using the on/off switch on the side.

2After the initial screen the main menu appears.

9LGHRV

6RXUFH

3LFWXUHV

)ROGHU9LHZ

0XVLF

6HWWLQJV

3 Select the internal memory, the USB storage medium or the memory card using the keys ¿. The chosen storage appears highlighted in white.

4Use the navigation keys to select Videos.

5Confirm with à.

6Use ¡/¢ to select the video file that you wish to play.

7Press à to start playback.

Notice

Displaying video files

Only those videos that are compatible with the Pocket Projector will be dis- played.

Notice

Navigation during playback

Previous, next title: Press À/Á on the remote control.

Review / cue: Press : / ; on the remote control or À/Á on the device.

Press T to stop or continue playback.

During playback you can adjust the volume using N/ O on the remote control. Press « or N repeatedly to shut off the volume completely.

File format

There are various video file formats: *.mov, *.avi, *.m4v,.... Many of these formats function as a container

that contains the various encoded audio and video files. MPEG-4, H.264, MP3, and AAC are all examples of encoded audio/video files. In order to play these files, the projector must read them and decode the audio/ video signals.

Please note that some files cannot be played as a result of different video and audio encoders.

Supported File Formats

Container

Video Format

 

 

*.avi

MJPEG, MPEG-4, H.264

 

 

*.mov

MJPEG, MPEG-4, H.264

 

 

*.mp4

MJPEG, MPEG-4, H.264

 

 

*.mkv

MPEG-4, H.264

 

 

*.flv

H.263, H.264

 

 

*.ts

H.264

 

 

*.m2ts

H.264

 

 

*.swf

SWF

 

 

Video Playback (A/V or YPbPr jacks)

1Connect the audio/video output of the external device to the A/V or VGA / YPbPr socket of the Pocket Projector. Use the corresponding cable and cable adapter for this purpose.

Notice

Both jacks occupied

If both sockets on the Pocket Projector are occupied, only the signal from the A/V socket will be played. In order to play the signal from the VGA / YPbPr socket, you have to remove the cable from the A/V socket.

2To find out how to deactivate the video output for the external device, please see the relevant instruc- tion manual. Most often, this option is labeled "TV out" or "TV Output" in the corresponding menu.

3Start the video playback on the external device.

4Modify the volume with N / O.

14

Philips · PPX1430

Image 14
Contents PPX1430 Dear Customer Packing ContentsOverview Table of Contents Power Supply General Safety InformationSetting Up the Device High Power LED‚ Navigation keys Remote Control… Volume keys Playback keysTop of the Device Bottom of the Device Symbols in the Main Menu Overview of the Menu FunctionsInstalling or Changing the Batteries of the Remote Control Connect power supply / charge batteryInitial Installation Initial OperationUsing the Remote Control Initial OperationConnect to the playback device Connecting usingConnecting using Video Cvbs Cable Component-Video YPbPr/ YUV CableConnect to the playback device Connecting to a Computer VGAResolution Image Refresh rate Memory Card / USB Storage Medium Connecting USB Storage MediumUSB Storage Medium with Mini USB Connector Inserting a Memory CardMany photos on the memory card or the USB medium Photo PlaybackMiniature view or list Zoom in / Zoom outFile format Video playbackVideo playback USB/SD card/internal memory Video Playback A/V or YPbPr jacksVideo playback Modify settings during playbackModify other settings Image Playback is switched off Music PlaybackDelete Files Managing filesCopy Files Connect to a computer USB Deleting photos on the memory cardSettings Cleaning ServiceCare Instructions for the Battery Service TroubleshootingProblems Solutions Power supply Technical DataAccessories AppendixAppendix Sagemcom Documents SAS