Philips PPX1430 user manual Connect to a computer USB, Deleting photos on the memory card

Page 18

8Use ¡/¢ to select other files.

9Press à.

10 Use ¡/¢ to select Delete.

11 Confirm with à.

12 Use ¡/¢ if you want to delete the files or cancel the deletion process.

13 Confirm with à.

Notice

Deleting photos on the memory card

When deleting photos via the computer, note that the photos may not be correctly dis- played when the memory card is inserted into the digital camera again. Digital cameras sometimes store additional information in specific folders, including previews and orien- tation information.

For this reason, only delete the photos using the digital camera.

Connect to a computer (USB)

You can use the USB cable to connect the Pocket Project to a computer. In this way, you are able to copy files back and forth between the internal memory, an inserted memory card and the computer. You can also delete them from the device.

1Switch the device off using the on/off switch on the side.

2Connect the small end of the USB cable to the deac- tivated Pocket Projector and the larger end to the computer.

3Switch the device on using the on/off switch on the side. Allow the computer a few moments to recog- nize the new hardware. The Pocket Projector is dis- played as a disk drive.

4If a memory card has been inserted, it will be dis- played as another disk drive.

5Now, you are able to move, copy or delete data from the computer, the memory card (if inserted) and the internal memory.

Notice

Deleting photos on the memory card

When deleting photos via the computer, note that the photos may not be correctly displayed when the memory card is inserted into the digital camera again. Dig- ital cameras sometimes store additional information in specific folders, including previews and orientation information.

For this reason, only delete the photos using the digital camera.

18

Philips · PPX1430

Image 18
Contents PPX1430 Packing Contents OverviewDear Customer Table of Contents Power Supply General Safety InformationSetting Up the Device High Power LED‚ Navigation keys Remote Control… Volume keys Playback keysTop of the Device Bottom of the Device Symbols in the Main Menu Overview of the Menu FunctionsInstalling or Changing the Batteries of the Remote Control Connect power supply / charge batteryInitial Installation Initial OperationUsing the Remote Control Initial OperationConnect to the playback device Connecting usingConnecting using Video Cvbs Cable Component-Video YPbPr/ YUV CableConnecting to a Computer VGA Resolution Image Refresh rateConnect to the playback device Memory Card / USB Storage Medium Connecting USB Storage MediumUSB Storage Medium with Mini USB Connector Inserting a Memory CardMany photos on the memory card or the USB medium Photo PlaybackMiniature view or list Zoom in / Zoom outFile format Video playbackVideo playback USB/SD card/internal memory Video Playback A/V or YPbPr jacksModify settings during playback Modify other settingsVideo playback Image Playback is switched off Music PlaybackManaging files Copy FilesDelete Files Connect to a computer USB Deleting photos on the memory cardSettings Service Care Instructions for the BatteryCleaning Troubleshooting Problems SolutionsService Power supply Technical DataAccessories AppendixAppendix Sagemcom Documents SAS