Philips cBright 2 Series manual Installation Connecting to video equipment, Projector

7. Installation Connecting to video equipment

Connecting to video equipment

Note: The figures in brackets (1) correspond to the figures in the S-VHSaccessories diagram.

The characters in brackets (a) correspond to the characters in fig. 4 of ‘Controls and connections’.

Caution!

Always switch off the projector before making any connections.

(c)(f)

Audio out USB Videov audio-in Dataata audioio-inin Video S-Video Data out D

PAL, NTSC, SECAM

			(c)	(e)
Audio out	USB	Videov	audio-in Dataata audioio-inin	Video	S-Video	Data out	Data in	Projector
								(2)	(4)

(3)

Projector							S-Video
	(2)
							Scart adapter
				VCR			S-Videoi
					R Audio L	Video	(not for USA
					out	out
							version)
			(3)
				1. Connect the S-Video out socket of a S-VHS video recorder,
			Scart adapter	Laser Disc player, video camera or TV to the S-Video socket
VCR	L Audio R	Video		(f) of the projector.
			(not for USA	For this use the S-Video connection cable (4) supplied.
	out	out
			version)	2. Connect the Audio out L/R sockets of the S-VHS video
				recorder, Laser Disc player, video camera or TV to the Video
				audio-in socket (c) of the projector.

1.Connect the Video out socket of a VCR, Laser Disc player, video camera or TV to the Video socket (e) of the projector. For this, use the video/audio connection cable (2) supplied.

2.Connect the Audio out L/R sockets of the VCR, Laser Disc player, video camera or TV to the Video audio-in socket (c) of the projector.

For this, use audio/video connection cable (2) supplied.

In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region):

1.Connect the Scart/RCA Audio Video adapter (3) supplied to the Scart connector of the VCR, Laser Disc player, video camera or TV.

2.Plug the video/audio connection cable (2) supplied into both the adapter and the Video (e) and Video audio-in (c) sockets of the projector.

In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region):

1.Connect the Scart/RCA Audio Video adapter (3) supplied to the Scart connector of the VCR, Laser Disc player, video camera or TV.

2.Plug the audio/video connection cable (2) supplied into both the adapter and Video audio-in socket (c) of the projector.

3.Plug the S-Video connection cable supplied into the VCR and the S-Video socket (f) of the projector.

12