5. Functional Overview | See illustrations |
|
|
Controls
On projector (fig. 1)
1Menu
To activate and deactivate the menu.
2Cursor Control
To manipulate the mouse cursor on the connected computer as long as the menu is not active. When the menu is active the Cursor Control controls the menu cursor. The cursor control works with up/down and left/right button operation.
Note: The Cursor Control can only function as a mouse cursor when the USB socket of the projector is connected to the USB downstream terminal of the computer.
3A(udio)/V(ideo) Mute
To mute the sound of the projector (or an externally connected sound amplifier) and to mute the picture.
4Standby
To switch the projector in or out of the power standby mode. When the projector is in standby mode, the ring around the button lights up red. When the projector is operating, the ring is green. When the projector receives a signal from the remote control the ring is fast blinking green/red.
5OK
To confirm actions in the menu when the menu is on screen.
6Source
To select the current projection source (Data,
7
Keystone 
To correct picture distortion of the vertical keystone type by digital scaling.
8Lamp indicator
–Lights up green when the lamp is on.
–Lights up orange when lamp life has almost expired.
–Lights up red when lamp life has expired.
–Fast blinks red when lamp start has failed.
–Slowly blinks green/red/orange when the lamp is starting. up or cooling down.
9Temperature indicator
–Lights up red in case of temperature error.
–Flashes in case of fan error.
0Zoomring
To adjust the size of the projected image.
!Focus ring
To adjust the focus of the projected image.
@Height/Level adjusters
To adjust the vertical and/or horizontal angle of the projector.
#Lens cap
To protect the lens when the projector is not in use.
$IR sensor
To receive the signals from the remote control.
On laser pointer remote control (fig. 2)
1Laser
To activate the laser pointer to indicate items on the screen.
Note: The laser pointer sends out a laser beam. Do not look into this beam!
2Mouse Left/Right
Function as the Left and Right mouse keys of your PC.
3– Volume +
To adjust the volume.
4Menu
To activate and
5A(udio)/V(ideo) Mute
To mute the sound of the projector (or an externally connected sound amplifier) and to mute the picture.
6Source
To select the current projection source (Data,
7
To capture a moving picture. The button toggles between the Freeze mode and the display situation.
8
To switch the Digital Zoom function ‘On’ or ‘Off’ (toggle button). In ‘On’ condition, the zoom centre can be selected using Cursor Control and the image is magnified with the zoom factor chosen under Magnification.
9Stand by On
To switch the projector in or out the the power standby mode.
0Cursor Control
To manipulate the mouse cursor on the connected computer as long as the menu is not active. When the menu is active the Cursor Control controls the menu cursor. The cursor control works with up/down and left/right button operation.
Note: The Cursor Control can only function as a mouse cursor when the USB plug of the projector is connected to the USB downstream terminal of the computer.
!OK
To confirm actions in the menu when the menu is on screen.
@Laser pointer
Exit point of laser pointer.
6