Philips cBright 2 Series manual Operation Preparation, For example

Fan error

The projector will switch off automatically.

Please contact a service centre for repair.

PHILIPS

Multimedia Projectors

8. Operation Preparation

General

1.Press the Stand by button to switch on the projector.

– The Standby indicator lights up green and the start up screen appears

for several seconds.

–When the average

lamplife time has almost expired and less than

Some examples:

Data	Video
	No signal

100 hours remain, the message ‘Warning: lamplife has almost expired’ will be displayed on the screen when switching the projector on. For this refer to the section ‘Lamp’ under ‘Maintenance’

2.Select the required source (Data, Video or S-Video) by pressing the Source button.

Note: When only one input source is connected, this source will automatically be selected. When more input sources are connected, the source with the highest priority will be selected (data, video, S-video). This setting can be changed in the ‘Settings’ menu.

3.Switch on the computer or start video playback.

–A feedback message appears on the screen, indicating the selected source.

Messages - General explanation

Messages are

Data selected as source.

S-Video

A/V Muted

S-Video selected as source. A/V muted.

Video selected as source, no input signal.

Video

A/V Muted

Video selected as source. A/V muted.

displayed in the centre of the screen. The problem is described in the header of the message display. Suggestion(s) to solve the problem are displayed in the gray part of the message display.

These messages cannot be suppressed.

On Screen Display menu - General explanation

All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays and with help of Menu, OK and Cursor Control on the projector or the remote control.

1.Press Menu.

–The menu bar appears on the screen.

The first item

is highlighted and its sub

menu is shown. Display Picture Audio Settings

Feedback messages

Feedback messages are displayed in the top right corner of the screen. They are displayed when:

–a signal comes up or goes down,

–when an input source is changed

–when Mute or A/V Mute is activated.

–when the Auto image function is set to On.

Depending on the selected source (Data, Video or S-Video) some options of the submenu may be greyed out. This indicates that these functions:

–are not available in a certain mode,

–have no function for the selected source.

Digital Freeze

Digital Zoom

Magnification

Auto Image

Horizontal size

Phase

Shift

Off On

Auto Image is used to automatically adjust Horizontal Size, Phase and Shift.

These messages will only be displayed when the menu option Feedback is set to ‘On’ in the Settings menu. All messages will be removed automatically after 4 seconds.

For example:

–Horizontal size under menu Display when Auto image is switched to ON.

–Hue under menu Picture when signaltype is not NTSC.

15