Philips PXG10 manual AV Mute Function, Turning off the On-Screen Display OSD, Economy mode

8. OPERATION

Other settings

English

AV Mute Function

This function can be used for muting the sound of the projector (or an external connected sound amplifier) and for muting the picture.

Press A/V Mute.

–“AV Mute” is displayed on the screen.

To return to the original projected image, press A/V Mute again.

Turning off the On-Screen Display (OSD)

The On-screen Display (“AV Mute”) that appears during mute screen can be turned off. When “AV Mute Disp” is set to

“ ” in the GUI menu, “AV Mute” will not be displayed during function.

1.Press Menu.

2.Press 1 / 2 to select “Options”.

3.Press 3 / 4 to select “AV Mute Disp”.

4.Press 1 / 2 to select “ ” to turn on or “ ” to turn off the function.

5.To exit from the GUI, press Menu.

On-Screen Display Override Function

This function allows you to turn off the on-screen messages that appear during “input select”. Once “OSD Display” is set to

“ ” in the GUI menu, the on-screen messages will not appear when Data 1, Data 2 or Video are pressed on the projector or Input on the remote control.

1.Press Menu.

2.Press 1 / 2 to select “Options”.

3.Press 3 / 4 to select “OSD Display”.

4.Press 1 / 2 to select “ ” to turn on or “ ” to turn off the On-Screen Display.

5.To exit from the GUI, press Menu.

Economy mode

This function allows you to reduce the power consumption when the projector is off.

Economy Modes
Selected mode	Automatic Power	RS232C/Monitor
Shutoff		out
Mode 1	ON	OFF
Mode 2	ON	ON
Mode 3	OFF	OFF
Mode 4	OFF	ON

Note:

The projector is factory preset to Mode 2.

1.Press Menu.

2.Press 1 / 2 to select “Options”.

3.Press 3 / 4 to select “Economy Mode”, and then press 2.

4.Press 3 / 4 to select the desired mode.

5.Press OK to save the setting.

6.To exit from the GUI, press Menu.

22