Philips SNB5600 manual Technical data, Management Features

Page 19

5 Technical data

Ports

• Four 10/100Mbps Rj-45 Ports

Management Features

Firmware upgrade via web based management

Web based management (configuration)

Power indicators

Event and history logging

Network ping

Security Features

Password protected configuration access

User authentication (PAP/CHAP) with PPP

Firewall NAT NAPT

VPN pass through (IPSec-ESP Tunnel mode, L2TP, PPTP)

Wireless Security

WEP 64/128 bit

WPA/WPA2

WPA/WPA2-Personal (PSK)

WPA-PSK with TKIP

WPA2-PSK with AES

WPA-PSK + WPA2-PSK with TKIP+AES.AES, or TKIP

LAN Features

IEEE 802.1d (self-learning transparent Bridging)

DHCP Server

DNS Proxy

Static Routing, RIPv1 and RIP

Radio Features

Wireless RF module Frequency Band

802.11g Radio : 2.4GHz

802.11b Radio : 2.4GHz

Europe - ETSI

• 2412~2472MHz (Ch1-Ch13)

Modulation Type

802.11g : OFDM (BPSK, QPSK, 16- and 64-QAM)

802.11b : CCK (11 Mbps, 5.5 Mbps), DQPSK (2 Mbps)

Operating Channels IEEE 802.11g

• 13 channels (ETSI)

Operating Channels IEEE 802.11b

• 13 channels (Europe)

Transmit Power and Sensitivity

Tx Output Power : (Typical)

11b : 18.5 +/- 1 dBm

11g : 14.5 +/- 1 dBm@54Mbps

RF Output Power Modulation Rate - Output Power (dBm)

802.11b - 1Mbps (16dBm)

802.11b - 2Mbps (16dBm)

802.11b - 5.5Mbps (16dBm)

802.11b - 11Mbps (16dBm)

Modulation Rate - Output Power (dBm)

802.11g - 6Mbps (15dBm)

802.11g - 9Mbps (15dBm)

802.11g - 12Mbps (15dBm)

802.11g - 18Mbps (15dBm)

802.11g - 24Mbps (15dBm)

802.11g - 36Mbps (15dBm)

802.11g - 48Mbps (15dBm)

802.11g - 54Mbps (15dBm)

Sensitivity Modulation Rate - Receiver 2.412~2.484 GHz Sensitivity (dBm)

802.11b - 1Mbps (90dBm)

802.11b - 2Mbps (88dBm)

802.11b - 5.5Mbps (85dBm)

802.11b - 11Mbps (84dBm)

Modulation Rate - Receiver Sensitivity Typical (dBm)

802.11g - 6Mbps (88dBm)

802.11g - 9Mbps (87dBm)

802.11g - 12Mbps (84dBm)

802.11g - 18Mbps (82dBm)

802.11g - 24Mbps (79dBm)

802.11g - 36Mbps (75dBm)

802.11g - 48Mbps (68dBm)

802.11g - 54Mbps (68dBm)

Environmental

Complies with the following standards :

Temperature : IEC 68-2-14

0 to 50 degrees C (Standard Operating)

-40 to 70 degrees C (non-operation)

Humidity

• 10% to 90% (non-condensing)

Vibration

• IEC 68-2-36, IEC 68-2-6

Shock

• IEC 68-2-29

Drop

• IEC 68-2-32

Input Power

• 9V DC

IEEE standards

IEEE 802.3, 802.3u, 802.11g, 802.1d

IUT G.dmt

IUT G.Handshake

IUT T.413 issue 2 - ADSL full rate

Standards, Conformance Electromagnetic, Compatibility

• CE, ETSI, R&TTE, ETS 300 328, ETS 300 826

Safety

• EN60950

Technical data

17

Image 19
Contents Register your product and get support at SNB5600 Page Table of contents Use one of the following disposal options Safety informationNetwork range & speed information ConformityWhat’s in the box Your Wireless RouterWhat else will you need LAN ports Power InletReset button WAN portGetting started InstallConnect Tip Your connection after the installation of the routerClick on Set Encryption Install a Wireless USB adapter SNU5600 Install a WiFi deviceInstall another WiFi device UPnP Configuring the Wireless RouterLog on the webpages Webpages’ menu structurePPPoE Password Settings WANRemote management Dynamic IP AddressChannel and Ssid Static IP Address LANClone MAC Address 5 DNSNAT Access controlSecurity 802.1XVirtual server Address Mapping Special ApplicationsNAT Mapping Table Intrusion detection MAC FilterURL blocking Schedule ruleDdns Ddns Dynamic DNS settings UPnP Upnp Universal Plug and Play settings6 DMZ Configuration Tools Tools ResetFirmware Upgrade Wireless settings Connection type settingsTime zone Dynamic IP Management Features Technical dataFrequently asked questions