Philips SNB5600 manual Tools Reset, Configuration Tools, Firmware Upgrade

Page 17

4.11 TOOLS

4.11.3 Reset

Use the Maintenance menu to backup the current configuration, restore a previously saved configuration, restore factory settings, update firmware, and reset the Wireless Router.

4.11.1 Configuration Tools

Choose a function and click "Next>>".

"Backup" allows you to save the Wireless Router’s configuration to a file.

"Restore" can be used to restore the saved backup configuration file. "Restore to Factory Defaults" resets the Wireless Router to the original settings. You will be asked to confirm your decision.

4.11.2 Firmware Upgrade

Use the Firmware Upgrade screen to update the firmware or user interface to the latest versions. Download the upgrade file from www.philips.com/support (Model SNB5600), and save it to your hard drive. Then click "Browse..." to look for the downloaded file. Click "BEGIN UPGRADE". Check the Status page Information section to confirm that the upgrade process was successful.

Click "REBOOT ROUTER" to reset the Wireless Router.

If you perform a reset from this page, the configuration will not be changed back to the factory default settings.

Note

If you use the Reset button on the rear panel, the Wireless Router performs a power reset. Press the button for over five seconds, and the factory default settings will be restored.

4.12 STATUS

The Status page displays WAN/LAN connection status, firmware, and hardware version numbers, illegal attempts to access your network, as well as information on DHCP clients connected to your network. The security log may be saved to a file by clicking "Save" and choosing

a location.

Configuring the Wireless Router

15

Image 17
Contents Register your product and get support at SNB5600 Page Table of contents Network range & speed information Safety informationConformity Use one of the following disposal optionsWhat else will you need Your Wireless RouterWhat’s in the box Reset button Power InletWAN port LAN portsConnect InstallGetting started Click on Set Encryption Your connection after the installation of the routerTip Install another WiFi device Install a WiFi deviceInstall a Wireless USB adapter SNU5600 Log on the webpages Configuring the Wireless RouterWebpages’ menu structure UPnPRemote management Password Settings WANDynamic IP Address PPPoEClone MAC Address Static IP Address LAN5 DNS Channel and SsidSecurity Access control802.1X NATNAT Mapping Table Address Mapping Special ApplicationsVirtual server URL blocking MAC FilterSchedule rule Intrusion detection6 DMZ UPnP Upnp Universal Plug and Play settingsDdns Ddns Dynamic DNS settings Firmware Upgrade Tools ResetConfiguration Tools Time zone Dynamic IP Connection type settingsWireless settings Management Features Technical dataFrequently asked questions