MW1122 User Manual
E Copyright Nokia Networks Oy C33902002SE_00
24
3.1.9 Save Config page
When you change the configuration, all configuration changes are
activated immediately without restart/reload. However, the
configuration will not be saved into the nonvolatile memory. If
MW1122 is restarted or powered down without saving the
configuration, the old configuration will be restored. Clicking the Save
configuration button saves the configuration into the nonvolatile
memory and the old configuration cannot be restored through the web
interface.
Figure 18 Save Config page
4 Features
MW1122 can operate as a bridge and/or Internet Protocol (IP) router
between Ethernet, wireless LAN and the virtual channels of
ADSL/ATM interfaces supporting both dynamic and static routing.

4.1 Interfaces

MW1122 has the following interfaces:
DEthernet interface (LAN)
DWireless LAN interface (WLAN)
D8 ATM VCC interfaces
DATM VCC management interface