MW1122 User Manual
connected to the ETH port of MW1122. In this case the ETH indicator should be lit.
3.1Browser management
You can use your PC’s web browser software to access the web configuration pages in MW1122. To access the web pages you must know the IP address of your MW1122 or, alternatively, the “name” that your MW1122 recognises.
Note
Before using your web browser for configuration, you must know the IP address or the name assigned to your MW1122.
There are three ways to find out whether to use a name or an IP address:
DYour service provider has given you an IP address for MW1122.
DYour MW1122 uses Dynamic Host Configuration Protocol (DHCP) and Domain Name Server. In this case the name is MW1122.
DYour MW1122 uses DHCP. In this case run winipcfg.exe (Windows 95) or ipconfig.exe (Windows NT). The IP address of MW1122 is the Default Gateway address shown by the ipconfig program.
3.1.1Opening a connection
To open a connection to the Nokia MW1122:
1.Start your web browser.
2.Enter the name (’MW1122’) or IP address of your Nokia MW1122 in the browser’s Location or Address field and press Enter.
3.Type in the username/password as requested. If no username/password is required, just click OK to proceed. The Nokia MW1122 Main Page appears.
6 | E Copyright Nokia Networks Oy | C33902002SE_00 |
