lower case characters only when typing the MAC address. You must identify the wireless station by filling the Name field. Activate the Client table by selecting Client table MAC address from the Admission method
Encrypting wireless connection
If you want to activate WEP, you have two options:
DUse a fixed default key for all stations. There are four default keys available and the key is selected by clicking the corresponding radio button. Typically, there is no need to use any other key than number 1.
DUse a separate
Before you type the encryption key, select the key length from the
Note
Remember to configure the same key to your wireless client. If you use your wireless client for web configuration, you can copy the key from the Key field and paste it to the wireless LAN client software. Then you can click the Apply to activate encryption. Note, that if you enable encryption on either client or MW1122 only, the wireless link will be disconnected until you have enabled encryption on both devices.
There are five security modes which can be chosen from Encryption mode
DNo encryption; In this mode, encryption is always disabled. If a station tries
DAllowed; In this mode, a station may use either
C33902002SE_00 | E Copyright Nokia Networks Oy | 11 |