Philips CPWBS054CPWBS054 manual Wireless, Channel and Ssid

26ENGLISH

Wireless

To configure the Wireless Base Station 11g as a wireless access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Network Name (or Service Set identifier/SSID) (Default: philips), and encryption options.

Channel and SSID

	You must specify a common radio channel and Network Name (SSID) to
	be used by the Wireless Base Station 11g and all of your wireless clients.
	Be sure you configure all of your clients to the same values. Network name
	(SSID).This should be set to the same value as other wireless devices in
	your network. (Default: philips.)
Note:	The Network Name (SSID) is case sensitive and can consist of up to
	32 alphanumeric characters.
	Transmission Rate: Set the data rate transmitted from the Wireless Base
	Station 11g.The lower the data rate, the longer the transmission distance.
	(Default: Fully Automatic.)
	Basic Rate: The highest rate specified is the rate the Wireless Base
	Station 11g will use when transmitting broadcast/multicast and management
	frames. (Default: All.)
	Channel: The radio channel through which the Wireless Base Station 11g
	communicates with PCs in its service range. (Default: Auto).
Note:	The available channel settings are limited by local regulations.
	Broadcast Network Name: Broadcasting the SSID on the wireless network
	for easy connection with client PCs.
	(Default: Enable)