Philips CPWBS054CPWBS054 Your Wireless Base Station 11g, Antennas, Reset button, Ethernet ports

ENGLISH 7

Your Wireless Base Station 11g

➊ ➋➍ ➌	➌	➊
	➎
1	Antennas

For connecting to your Wireless Network Adapters (also called WLAN or WiFi).

2Reset button

•Press it for 2 seconds to reboot the wireless base station 11g.

•Keep it pressed for more than 5 seconds to restore the factory default settings.

3Ethernet ports

RJ-45 sockets for Broadband Modem and Ethernet network cables.

4Power

Socket for connecting the power adapter to the Wireless Base Station 11g.

5Indicator LEDs

Display the network status.

LED	LED colour	Meaning
Power	Blue	Off when power is disconnected
		On when receiving power.
		Blinking when rebooting
Wireless		Off when wireless is disabled.
(Wireless	Blue	On when wireless enabled and client active.
home network)		Blinking when transmitting.
Modem	Blue	Off when not connected
(Internet modem)		On when a link is established.
		Blinking when transmitting.
1/2/3/4 LAN	Yellow (10 Mbps)	Off when not connected
(Wired home network)	Blue (100 Mbps)	On when a link is established.
		Blinking when transmitting.

6Label with MAC address

The MAC address consists of 12 characters (e.g. 00:30:F1:A1:F4:A5 or, in general, xx:xx:xx:xx:xx:xx) and is the unique hardware address of this network device. Some safety features or network identification purposes need this MAC address.