Philips BDP9600 manual Route audio to other devices, Option 2 Connect to the component video jacks

Tip

•If the TV has a DVI connector only, connect via an HDMI/DVI adaptor. Connect an audio cable for sound output.

•If there is a blank TV screen under HDMI connection, on the remote control press and then press “731” (numeric buttons) to recover picture display.

•If this player connects to a TV compatible with 1080p or 1080p/24Hz, Philips recommends HDMI category 2 cable, also known as High Speed HDMI cable, for optimal video and audio output.

•To play the digital video images of a BD-video or DVD- video via an HDMI connection, it is necessary that both this player and the display device (or an AV receiver/amplifier) support a copyright protection system called HDCP (high- bandwidth digital content protection system).

•This connection provides the best picture quality.

Option 2: Connect to the component video jacks

Y

Pb AUDIO IN

Pr

1Connect the component video cables (not supplied) to:

•the Y Pb/Cb Pr/Cr jacks on this player.

•the COMPONENT VIDEO input jacks on the TV.

2Connect the audio cables (not supplied) to:

•the Audio LINE OUT -L/R jacks on this player.

•the AUDIO input jacks on the TV.

Tip

•The component video input jack on the TV might be labeled as Y Pb Pr or YUV.

Option 3: Connect to the composite video jack

AUDIO IN

VIDEO IN

1Connect a composite video cable (not supplied) to:

•the VIDEO jack on this player.

•the VIDEO input jack on the TV.

2Connect the audio cables (not supplied) to:

•the Audio LINE OUT- L/R jacks on this player.

•the AUDIO input jacks on the TV.

Tip

•The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.

Route audio to other devices

You can route the audio from this player to other devices.

Connect to an HDMI-compliant AV receiver/amplifier

HDMI IN

1Connect an HDMI cable (not supplied) to:

•the HDMI jack on this player.

•the HDMI jack input jack on the device.

12EN