Philips BDP9600 manual Get started, Connect a network, Prepare the remote control, Connect power

Connect a network

With a wired or wireless connection (see “Get started” > “Set up a network”), you can connect this player to:

•the Internet (for software update/BD Live/Net TV service).

•or a home network (to access media files from a DLNA media server, e.g. PC).

Note

•Internet access to Philips website for software update may not be allowed, depending on the router you use or the Internet Service Provider’s policy. Contact your Internet Service Provider for more information.

4 Get started

Caution

•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

Prepare the remote control

1Press at the back of the remote control to open the back cover.

Connect power

Caution

•Risk of player damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.

•Before connecting the AC power cord, ensure you have completed all other connections.

Note

•The type plate is located on the back of the player.

1 Connect the AC power cable to:

•this player.

•the wall socket.

»This player is ready to be set up for use.

2Insert two AAA batteries with correct polarity (+/-) as indicated.

3Replace the back cover.

Note

•If you are not going to use the remote control for a long time, remove the batteries.

•Do not mix batteries (old and new or carbon and alkaline, etc.).

•Batteries contain chemical substances, so they should be disposed of properly.

Find theTV input

1Press to turn on this player.

2Turn on the TV and switch to the video input (refer to the TV user manual on how to select the A/V input).

First time use

When you turn on this player for the first time or this player is reset to the default setting, you are prompted to select a menu display language and then a country.

14EN