Philips BDP9600 manual Troubleshooting, Care, Specifications, Picture, Usb

Care

Caution

•Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs.

Clean discs

Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement.

Specifications

Note

•Specifications are subject to change without notice

Video

•Signal system: PAL / NTSC

•Composite video output: 1 Vp-p (75 ohm)

•Component video output: 480/576i, 480/576p, 720p, 1080i

•Y: 1 Vp-p (75 ohm)

•Pb: 0.7 V-pp (75 ohm)

•Pr: 0.7 V-pp (75 ohm)

•HDMI output 480p, 576p, 720p, 1080i, 1080p,

1080p24 Audio

•2 Channel analog output

•Audio Front L + R : 2 Vrms (> 1 kohm)

•Signal to noise ratio: > 120 dB

•Dynamic Range (1kHz): >100 dB

•Total harmonic distortion: <90 dB

•7.1 Channel analog output

•Audio Front L + R : 2 Vrms (> 1 kohm)

•Audio Surrond L + R : 2 Vrms (> 1 kohm)

•Audio Center : 2 Vrms (> 1 kohm)

•Audio Subwoofer : 1.15 Vrms (> 1 kohm)

•Audio Rear L + R: 2 Vrms (> 1 kohm)

•Digital output: 0.5 Vp-p (75 ohm)

•Optical, Coaxial

•HDMI output

USB

•Compatibility: Hi-Speed USB (2.0)

•Class support: UMS (USB Mass Storage Class) Main unit

•Power supply rating

• Europe: 220~240V ~AC, ~50 Hz

•Power consumption: 25 W

•Power consumption in standby mode: < 0.2 W

•Dimensions (w x h x d): 435 x 70 x 260 (mm)

•Net Weight: 5.0 kg

Accessories supplied

•Remote control and batteries

•Power cable

•Quick start guide

•User manual

•CD-ROM built in multi-lingual user manual Laser Specification

•Laser Type:

•BD Laser Diode: AlGaInN

•DVD Laser Diode: AlGaInP

•CD Laser Diode: AlGaInP

•Wave length:

•BD: 405 +5nm/-5nm

•DVD: 655 +10nm/-10nm

•CD: 790 +10nm/-20nm

•Output power:

•BD: Max. ratings: 20mW

•DVD: Max. ratings: 6mW

•CD: Max. ratings: 7mW

8 Troubleshooting

Warning

•Risk of electric shock. Never remove the casing of the player.

To keep the warranty valid, never try to repair the player yourself.

If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/welcome.

Main unit

No reaction to the remote control.

•Connect this player to the power outlet.

•Point the remote control at the IR sensor located on the front panel of this player.

•Insert the batteries correctly.

•Insert new batteries in the remote control.

Picture

No picture.

•See TV manual for correct video input selection. Change the TV channel until you see

the Philips screen.

No picture on HDMI connection.

•If this player is connected to an unauthorized display device with an HDMI cable, the audio/ video signal may not be output.

English

EN 29