Philips SE245 manual Clock & Alarm, Set date and time, Set alarm

7 Clock & Alarm

If you subscribe to your network’s Caller Identification service, the time on your SE245 may be set automatically each time you receive a call, depending on your network provider.

You can also set or adjust the time using the Clock & Alarm menu.

7.1 Set date and time

Press , scroll to

CLOCK/ALARM and press

.

Display shows DATE & TIME. Press . Enter the date in the format DD-MM e.g. 04 08 for 4 August and press .

Enter the time using the

24 hour format HH – MM, e.g. 14 45 for 2.45pm and

press to confirm. Press to return to standby.

Clock & alarm

Tip

Press to cancel at any time.

7.2 Set alarm

Press , scroll to CLOCK/ALARM and press .

Scroll to SET ALARM and press .

Scroll or to OFF,

ON ONCE or ON DAILY and

press .

If you select ON ONCE or ON DAILY, enter the time using the 24 hour format

HH– MM, e.g. 14 45 for 2.45pm and press .

Press to return to standby.

When the alarm goes off, press any key to stop the ring.

Note

•Once the alarm is set to on, the icon is displayed.

•The alarm will ring at the medium level. ALARM ON

and the will flash on the display.

29