Press 
to confirm.
10.8 Remote access
Remote access allows you to operate your answering machine and listen to your messages by calling your SE245 from another phone.
The default setting is activated.
Call your SE245. When you hear your outgoing message, press #.
Enter your 4 digit PIN. The default code is 0000. You hear a confirmation beep.
Note
Change this code for increased security, see ‘PIN’, on page 38.
After entering your PIN, as stated above, use the keypad to operate your SE245 answering machine :
Play all messages | 2 |
Play previous message | 1 |
Play next message | 3 |
Delete message playing | 6 |
Switch answer machine on | 7 |
Stop playback | 8 |
Switch answer machine off | 9 |
10.8.1 Remote Access activated/deactivated
1Press 
scroll 
to
ANSW MACHINE and press
.
2Scroll 
to ANSW SETTINGS and press 
.
3Scroll 
to REMOTE ACC and press 
.
4Scroll 
or 
to select ACTIVATED or
DEACTIVATED.
5Press 
to confirm.
10.9 Call screening
Use your handset or base speaker to hear a caller leaving
amessage.You can then choose to ignore the caller or pick up the call.
The default settings are :
•Handset call screening : Off
•Base call screening : On.
At the handset :
If you want to interrupt and take the call press 
or
.
44 | Using your answering machine |