IEEE 1284 SERIAL TO PARALLEL CONVERTER
SWITCH 2: REVERSE FLOW CONTROL
The setting for Switch 2 determines whether the serial device receives reverse flow control information from the printer (see IEEE 1284 specification for details on reverse flow control).
Reverse Flow Control | SW2 |
Hardware (Nibble) | OFF (factory default) |
None (Compatible) | ON |
|
|
SWITCHES 3 AND 4: DATA RATE
Switches 3 and 4 set the serial data rate for the Converter.
Data Rate | SW3 | SW4 |
9600 bps | OFF (factory default) | OFF (factory default) |
19,200 bps | OFF | ON |
38,400 bps | ON | OFF |
|
|
|
115,200 bps | ON | ON |
|
|
|
SWITCHES 5 THROUGH 8: FUTURE USE
10