ACS-1208AL / ACS1216AL Front View
1
2
3
4
10
9
8
5 6
7
1.Handle
Pull to slide the KVM module out; push to slide the module in.
2.Cover
After sliding the KVM module out, flip up the cover to access the LCD monitor, keyboard and touchpad.
3.Port LEDs
Port LEDs provide status information about their corresponding CPU Ports. The top row of LEDs corresponds to Ports 1 - 8; the bottom row corresponds to Ports 9 - 16. There are two LEDs for each Port. The one on the left is the On Line LED; the one on the right is the Selected Port LED:
M An On Line LEDs light ORANGE to indicate that the computer attached to the corresponding port is up and running.
M A Selected LEDs light GREEN to indicate that the computer attached to the corresponding port is the one that has the KVM focus. The LED is steady under normal conditions, but flashes when its port is accessed under Auto Scan Mode (see F7 SCAN, p.