OSD Operation
(F3 SET: continued)
Setting | Function |
PORT ID | Selects how the Port ID is displayed: the Port Number alone |
DISPLAY | (PORT NUMBER); the Port Name alone (PORT NAME); or |
MODE | the Port Number plus the Port Name (PORT NUMBER + |
| PORT NAME). The default is PORT NUMBER + PORT |
| NAME). |
|
|
SCAN | Determines how long the focus dwells on each port as it |
DURATION | cycles through the selected ports in Auto Scan Mode (see F7 |
| SCAN, p. |
| press [Enter]. Default is 5 seconds; a setting of 0 disables the |
| Scan function. |
|
|
SCAN/SKIP | Selects which computers will be accessed under Skip Mode |
MODE | (see F5 SKP, p. |
| p. |
| ALL - All the Ports which have been set Accessible (see SET |
| ACCESSIBLE PORTS, p. |
| QUICK VIEW - Only those Ports which have been set |
| Accessible and have been selected as Quick View Ports (see |
| SET QUICK VIEW PORTS, p. |
| POWERED ON - Only those Ports which have been set |
| Accessible and are Powered On; |
| QUICK VIEW + POWERED ON - Only those Ports which |
| have been set Accessible and have been selected as Quick |
| View Ports and are Powered On. The default is ALL. |
|
|
SCREEN | If there is no input from the console for the amount of time set |
BLANKER | with this function, the screen is blanked. Key in a value from |
| 1 - 30 minutes, then press [Enter]. A setting of 0 disables this |
| function. The default is 0 (disabled). |
|
|
HOTKEY | Enables / Disables the Hotkey Command function in case a |
COMMAND | conflict with programs running on the computers occurs. |
MODE |
|
|
|