Hotkey Operation
Skip Mode This feature allows you to switch between computers in order to monitor them manually. You can dwell on a particular port for as long or as little as you like - as opposed to Auto Scanning, which automatically switches after a fixed interval. To invoke Skip Mode, key in the following Hotkey combination:
1.Invoke Hotkey Mode (see p.
2.Key in [Arrow]
M Where [Arrow] refers to one of the Arrow keys. After you press [Arrow], you automatically exit Hotkey Mode, and enter Skip Mode where you can switch ports as follows:
←Skips from the current port to the first accessible port previous to it. (See Scan/Skip Mode, p.
→Skips from the current port to the next accessible port.
↑Skips from the current port to the last accessible port of the previous Station.
↓Skips from the current port to the first accessible port of the next Station.
MOnce you are in Skip Mode, you can keep on skipping by pressing the Arrow keys. You don’t have to use the [NumLock] +
MWhile Skip Mode is in effect, ordinary keyboard and mouse functions are suspended - only Skip Mode compliant keystrokes can be input. You must exit Skip Mode in order to regain normal control of the console.
3.To exit Skip Mode, press [Esc] or [Spacebar].