Chapter 3: Assembly and Installation
7.Slide out the console drawer. Push the KVM module evenly toward the drawer and secure both units using the attached thumbscrews. See Figure
Thumbscrews (permanently |
attached to the tray) |
KVM module |
Console drawer |
Figure 3-10. Securing the KVM module to the console drawer.
8. Make sure the Centronics connectors on the KVM module and attached cable are firmly mated. See Figure 3-11.
5⁄16" (8 mm) |
Centronics |
connector |
on cable |
Figure 3-11. Centronics connectors.
9.Connect the power supply to the barrel connector on the KVM module.
10.For operation, pull out the drawer from the 4-post rack or cabinet and latch it in the extended position. A locking mechanism locks the drawer when it’s pulled out, pushed in, or folded down. When not in use, push in the drawer, then fold down, lock, and secure the display.
Page 13 |