Black Box Blackbox ServTray, KVT415A-R2, KVT419A-R2 Overview Introduction, What’s Included

Chapter 2: Overview

2. Overview

2.1 Introduction

Each ServTray Kit includes a ServTray™ (KVT415A-R2, KVT417A-R2, or KVT419A-R2), a KVM module (KVT4S1UV, KVT4S8PV, KVT4S8UV, KVT4S16PV, or KVT4S16UV), and a Universal Rear Mounting Bracket Extension Kit. This manual describes how to use the ServTray and the Universal Rear Mounting Brackets, and a separate manual (included with your kit) explains how to use the KVM module.

Control your 4-post-rack- or cabinet-mounted USB or PS/2® server with the compact, easy-to-use ServTray. It consists of a keyboard, mouse, LCD panel, and KVM module housed in an industry-standard 19" 1U-height rack drawer (see Figure 2-1).

Three models are available: the ServTray with a 15" LCD panel (KVT415A-R2), the ServTray with a 17" LCD panel (KVT417A-R2), and the ServTray with a 19" LCD panel (KVT419A-R2). All models feature a full 105-key, low-profile, sturdy keyboard and touch pad with an ergonomically designed hand rest. The KVT415A has a maximum resolution of 1024 x 768, and the KVT417A and KVT419A have a maximum resolution of 1280 x 1024.

Install the ServTray in 4-post racks or cabinets that are 23.7" to 45.3"D (60.2 to 115.1 cm). When installing the ServTray, you’ll need to use the Universal Rear Mounting Brackets (described in Section 2.2) that are included in your ServTray Kit.

A KVM module is also included with the ServTray. To control more than one USB or PS/2 server, connect the ServTray to a ServSwitch™.

The KVM module comes with a universal Centronics® 36-pin connector; use it to connect the module to the console drawer. The module has a barrel connector for power. The large screws are used in place of 10-32 or 12-24 screws (described in Chapter 3, not included) if required by your rack.

Power supply

Figure 2-1. ServTray Kit components (left to right): Uiniversal rear mounting brackets,

KVM Module with power supply, and 1U slide drawer.

2.2 What’s Included

•(1) ServTray 15", 17", or 19" LCD console (LCD panel, keyboard, and mouse pad console drawer)

•(1) KVM module with power supply (based on product code)

•(1) universal rear rail kit (includes [2] brackets, [2] extenders, and [8] screws)

•(10) 0.19" x 0.43" (0.5 x 1.1 cm) screws

•(10) 0.12" x 0.24" (0.3 x 0.6 cm) screws

•This user’s manual