Black Box KVT419A-R2, KVT415A-R2, KVT417A-R2, Blackbox ServTray manual Assembly and Installation

Chapter 3: Assembly and Installation

3. Assembly and Installation

1.Choose a proper position in the cabinet for the rack drawer.

2.Using eight counter-sunk screws (included), attach the extensions (included with your ServTray kit) to both sides of the KVM switch module. See Figures 3-1 through 3-5. The wide-edged plastic extension should be on the top side (see Figure 3-5).

Figure 3-1. Rear brackets and extensions.

Figure 3-2. Extensions and KVM module.

Figure 3-3. Attaching the extensions to one side of the KVM switch module.