APPENDIX C
SERVICING INFORMATION
Opening of the case is only to be performed by qualified service personnel.
WARNING !
Before servicing ensure that appliance coupler is
disconnected.
Always disconnect the power cord from the rear panel of
the bridge/router.
Geraetesteckvorrichtung trennen vor den Wartung.
Opening the case
1)Remove power from the bridge/router and remove the other cabling.
2)Turn the bridge/router over and place it on a flat, cushioned surface.
3)Remove the two Phillips head screws that fasten the case together.
4)Hold the two halves of the case together and turn the bridge/router right side up.
5)Lift off the top half of the case.
73