Black Box PS034E, PS035A Setup Mode, Ascii printer type is only selectable via the front panel

Page 20

PQ-6 PLUS (RO)

4.1.2INDICATOR LIGHTS

•Power: Indicates that AC power has been applied to the unit.

•Line Sync: Indicates that the PQ-6 is responding to host polls.

•DTR (Data Terminal Ready): This signal from the printer to the PQ-6 PLUS (RO) indicates that the printer is ready. This signal must be present for printing to proceed. You can enable flow control from the PQ-6 PLUS (RO) to the printer via XON/XOFF characters (Hex 11/Hex 13) or by dropping DTR when the printer is not able to accept more data. When used as a Centronics port, the DTR light indicates select from the printer.

•Data Out: Shows the data sent to the printer from the PQ-6 PLUS.

•Test: Blinks to indicates that internal tests are running. Blinks repeatedly if the select signal from the printer is not present.

NOTE

Initial setup of internal switch and jumper settings for baud rate, printer interface, etc., must have been done previously. See Section 3.1.

4.2 Setup Mode

You can configure the PQ-6’s twinax address, printer emulated, ASCII printer type, page select and command pass-through by the front panel or the internal DIP switches.

NOTE

ASCII printer type is only selectable via the front panel.

To enable configuration via the front panel, set the internal DIP switch bank 2 position 4 to OFF. The factory-default setting for this switch position is ON.

To place the PQ-6 PLUS (RO) in setup mode, press and hold in the test switch while pressing and releasing the reset switch, then release the test switch. The PQ-6 PLUS (RO) will print the following menu on the attached printer:

PQ-6 PLUS REV. 1.41 SOFTWARE SETUP MODE

Press START to select switch settings

Press STOP to print switch settings

Press LF to do Printer Test

Press FF to return to twinax mode

Press FF to accept switch setting

Press STOP to toggle switch setting

19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PQ-6 Plus RO PQ-6 Plus RO PQ-6 Plus RO Trademarks Contents Specifications Description IntroductionApplication Typical Application Installation Initial SetupBoard Layout Switch Baud Rate Pin No Signal Source Description Initial Test Device Response Corrective Action Self-Test Sample Self-Test Printout System Configuration and Connection 1 PQ-6 Plus RO Address SelectionPlacing the PQ-6 in Operation PQ-6 Plus RO Operator Controls and Indicators OperationSetup Mode Ascii printer type is only selectable via the front panelDevice Address Command Pass-Through LPIBuffer Print Mode Example of a Buffer Print ListingFunctions and Options Function Appendix a PQ-6 Plus RO Ebcdic to Ascii Translation Table HEX Ebcdic HEX Ascii DescriptionPQ-6 Plus RO Any characters not shown are not used Appendix B PQ-6 Plus RO Quick Setup Guide Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax

PCA35A-R3, PS035A, PCA35AE-R2, PS034E specifications

The Black Box PS034E, PCA35AE-R2, PS035A, and PCA35A-R3 are advanced solutions designed to meet the growing demands for high-performance data transmission and connectivity in various applications. These products are known for their exceptional capabilities, making them essential tools for professionals in networking, telecommunications, and data management.

The Black Box PS034E stands out with its compact design, facilitating easy installation in various environments. It offers a range of features, including support for high-speed data transmission, compatibility with a broad spectrum of devices, and robust security protocols. This model is particularly suited for organizations looking to enhance their network efficiency while ensuring reliable, uninterrupted connectivity.

The PCA35AE-R2 model is specifically engineered to provide seamless remote access to networked devices. One of its standout features is its advanced encryption technology, which safeguards sensitive data during transmission. Furthermore, the PCA35AE-R2 supports multiple protocols, making it versatile for various applications, from industrial automation to smart buildings, further enhancing its appeal in diverse sectors.

Moving on to the PS035A, this unit emphasizes user-friendly design without compromising performance. It features plug-and-play functionality, which significantly reduces setup time and enables users to get their systems running quickly. The PS035A is also equipped with smart diagnostics, enabling users to monitor and troubleshoot issues efficiently, thereby minimizing downtime and maintenance costs.

The PCA35A-R3 model incorporates cutting-edge technology, including AI-driven monitoring capabilities. This state-of-the-art feature allows for real-time data analysis and predictive maintenance alerts, empowering users to address potential issues before they escalate into significant problems. Additionally, its robust design ensures high durability, making it suitable for deployment in demanding environments.

All four devices share common characteristics, such as high reliability, scalability, and ease of integration into existing systems. They cater to various sectors, including IT, education, healthcare, and manufacturing, showcasing their versatility in addressing different connectivity challenges. Collectively, these Black Box products represent the pinnacle of modern engineering, designed for efficiency, scalability, and security in an increasingly connected world.
Top Page Image Contents