Fujitsu MB3845, MB3842 manual Absolute Maximum Ratings, Recommended Operating Conditions

MB3842/MB3845

■ABSOLUTE MAXIMUM RATINGS

Parameter	Symbol	Condition	Rating		Unit
			Max.	Min.
Input voltage	VIN	—	–0.3	7.0	V
ENABLE voltage	VEN	—	–0.3	7.0	V
Switch current	ISW	—	—	1.8	A
Power dissipation	PD	Ta = +85°C	—	216	mW
Storage temperature	TSTG	—	–55	+125	°C

WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.

■RECOMMENDED OPERATING CONDITIONS

Parameter	Symbol	Condition		Value		Unit
			Min.	Typ.	Max.
Input voltage	VIN	—	2.5	5.0	5.5	V
ENABLE voltage	VEN	VEN ≤ VIN	0	—	5.5	V
Switch current	ISW	VIN = 2.5 V to 5.5 V	—	—	0.6	A
SS pin capacitance	CSS*	—	—	—	10	nF
OC sink current	IOCS	VIN = 5.0 V, VOC = 0.4 V	2.0	5.0	—	mA
Current limit	RLIM*	VIN = 5.0 V (ISW = 0.6 A)	1.4	2.0	2.6	kΩ
resistance		VIN = 5.0 V (ISW = 0.1 A)	3.6	6.2	9.1	kΩ
Operating	TOP	—	–20	—	+85	°C
temperature

* : For CSS, RLIM settings, see “TYPICAL CHARACTERISTICS” and “FUNCTIONAL DESCRIPTION”.

WARNING: The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device's electrical characteristics are warranted when the device is operated within these ranges.

Always use semiconductor devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure.

No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.

5