Black Box VDSL2 Line Power Ethernet Extender Kit, LBLPO1A-KIT manual Installation

Chapter 3: Installation

3. Installation

Because the VDSL2 Line Power Ethernet Extender units require no configuration, they can be installed quickly. Follow these steps:

1.Connect the line interface between the units via RJ-11 cable.

2.Connect the Ethernet interface using RJ-45 cable.

3.Connect the power plug to the master unit with the 12V/2A DC power adapter.

CAUTION: Verify that the AC-DC adapter conforms to your country’s AC power requirement and then insert the power plug.

NOTE: The interconnecting cables should be acceptable for external use and rated for the proper application considering voltage, current, anticipated temperature, flammability, and mechanical serviceability.

Table 3-1 shows the data rate and transmission distance information via 26 AWG cable at 6 dB without a rate limit.

Table 3-1. Data rate and transmission distance.

Page 11