VDSL2 Line Power Ethernet Extender Kit
2. Overview
2.1 Introduction
The LBLP01A-KIT, a line power pair of VDSL2 (Very high-bit-rate Digital Subscriber Line) Ethernet Extenders, provides broadband transmission rates up to 100/60 Mbps downstream/upstream over single-pair copper line for point-to-point Ethernet connectivity. It’s a cost-effective line power solution for high-bandwidth applications such as LAN-to-LAN connectivity, video streaming, FTTB, and MDU/MTU.
The LBLP01A-KIT supports transmission distance up to 500 feet (152.4 m) for line power connection at 100/60 Mbps down- stream/upstream and up to 1000 feet (304.8 m) at 98/53 Mbps downstream/upstream. The LBLP01A-KIT is always configured as one master unit for the central side, and one slave unit for the remote side. The line power is supplied from the master to slave unit and conforms to the Safety-Extra-Low-Voltage (SELV) standards. The Ethernet extender kit is also plug-and-play and is easy to install.
The LBLP01A-KIT also conforms to the ITU-T G.993.1 and G.993.2 to meet VDSL/VDSL2 and SG15Q4 DMT for network require- ments.
2.2 Features
•ITU-T G.993.1, G.993.2 VDSL/VDSL2 and SG15Q4 DMT compliance
•100-/60-Mbps downstream/upstream for distances up to 500 feet (152.4 m); 98-/53-Mbps downstream/upstream for distances up to 1000 feet (304.8 m)
•Supports line power with VDSL2 connection
•Conforms to Safety-Extra-Low-Voltage (SELV) standards
•RJ-11 connector for DSL interfaces plus RJ-45 connector for Ethernet LAN port
•5 LED indicators for master unit, 4 LED indicators for slave unit
•4 DIP switches for configuration settings
•Trellis coding support for up to 1024 discrete multi-tone (DMT) bins
•Auto MDI-X for 10BASE-T/100BASE-TX Ethernet LAN ports, so you don’t need crossover cable on the Ethernet side
•Low latency for video/voice/data applications
•Line surge protection
•Selectable Fast and Interleaved modes
•Selectable fixed data rate and fixed SNR margin
