Black Box VX-HDMI-IP-UTX, VX-HDMI-IP-VTX, VX-HDMI-IP-MRX, VX-HDMI-IP-VRX manual Function Button

Page 17

Chapter 2: Overview

source, cable, and display device used. Low-quality cables degrade output signals, causing elevated noise levels. Use the proper cable and make sure the display device can handle the resolution and refresh rate selected.

NOTE: The system will disable the video output signal when it detects non-HDCP-

compliant display(s) trying to play on the HDCP video source. All the connected output displays MUST be HDCP compliant when the video source is HDCP compliant.

2.6.4 Function Button

The Function button on the extender units operates as described in Table 2-3.

		Table 2-3. Function button.

	Action	Description

	Press for 1 second.	Toggle between graphics and
	Press for 1 second.	video mode.
		video mode.

1. Press and hold the Function button.

2.Apply power to the receiver unit.

3.Release right after the Network Status LED starts blinking.

EDID copy (Receiver unit only!)

724-746-5500 blackbox.com

Page 17

Image 17

Contents Extend audio and video signals via an existing LAN Trademarks Used in this Manual Trademarks Used in this ManualFCC RFI Statement Normas Oficiales Mexicanas NOMElectrical Safety StatementNOM Statement NOM Statement Table of Contents Accessing the Web Interface for a Transmitter Specifications SpecificationsAvailable Models OverviewOverview Introduction What’s Included Multicast and Video Wall Transmitter and Receiver FunctionsVideo Wall Transmitter and Receiver Exclusive Functions Hardware Description Transmitters Additional Items You Will NeedTransmitter top panel Components of the Transmitters Receiver front panel ReceiversReceiver top panel Indicators Function Button Edid Copy Reset ButtonInstallation InstallationAdvanced Configuration ConfigurationConfiguration Basic Configuration Accessing through Serial Accessing through Telnet Advanced Commands Advanced CommandsAdvanced Commands COM1 PuTTY screen Advanced IP CommandsAdvanced Multicast IP Configuration Serial Extension TransmitterReceiver Options controlling local serial lines Telnet Extension Setting up Telnet extension using a Telnet protocolTurning off line echo and local line editing Accessing the Transmitter without an IP Address Accessing the Web InterfaceAccessing the Web Interface Setup screen without IP address Web setup screen with IP address Video Wall Setup Video Wall FeaturesVideo Wall Features Basic Setup screen Number to the connected monitor Shows the Advanced Setup screen. -2 describes its components Target Show OSD checkbox Advanced Commands screen Row Position Contacting Black Box TroubleshootingTroubleshooting Problem/Solutions Shipping and Packaging Appendix. Connector Pinouts Appendix Connector PinoutsAbout Black Box Chapter