Black Box VX-HDMI-IP-MRX, VX-HDMI-IP-VTX, VX-HDMI-IP-VRX, VX-HDMI-IP-UTX manual Specifications

Page 8

Chapter 1: Specifications

1. Specifications

Compliance — FCC, TUV, CE, UL®, CSA, RoHS, WEEE

Default IP Address — 169.254.x.x (with no DHCP address)

NOTE: To find the IP address of any receiver, simply connect to monitor and power up to get IP address. To find the IP address of any other receiver or transmitter, use Telnet to connect to any device in the system and use a “node-list” command or connect with the serial interface.

Efficiency Level — Level IV

Heat Dissipation — 3.41 BTU/hr.

HDCP — Supported

Leads Supported — HDMI video and RS-232

Maximum Distance from CPU to TX — 16 ft. (5 m), HDMI Maximum Distance between TX and RX — 328 ft. (100 m)*

*NOTE: Use a network switch to get greater distances.

MTBF — 90,000 hours

User Controls — (1) Reset button, (1) 16-position rotary selection switch,

(1) Function button

Connectors — (1) HDMI female, (1) RJ-45 interconnect/LAN connection,

(1)2.1-mm barrel connector for power, (2) RJ-12 6P6C† †NOTE: Only 4 center pins are used at this time.

Indicators — (1) LED for Link and Power; (1) LED for Network activity

Temperature Tolerance — Operating: 32 to 104° F (0 to 40° C); Storage: -4 to +140° F (-20 to +60° C)

Humidity Tolerance — Operating: 80%, noncondensing

Maximum Altitude — 10,000 ft. (3048 m)

Power — Input: 100–240 VAC, 50/60 Hz, 0.6 A;

Output: 9 VDC;

Consumption: 13.5 W;

Power Supply Cord Length: 6 ft. (1.8 m)

Size — 0.98"H x 3.77"W x 5.11"D (2.5 x 9.6 x 12.9 cm)

Weight — 1.1 lb. (0.5 kg)

Page 8

724-746-5500 blackbox.com

Image 8
Contents Extend audio and video signals via an existing LAN Trademarks Used in this Manual Trademarks Used in this ManualNormas Oficiales Mexicanas NOMElectrical Safety Statement FCC RFI StatementNOM Statement NOM Statement Table of Contents Accessing the Web Interface for a Transmitter Specifications SpecificationsAvailable Models OverviewOverview Introduction What’s Included Multicast and Video Wall Transmitter and Receiver FunctionsVideo Wall Transmitter and Receiver Exclusive Functions Additional Items You Will Need Hardware Description TransmittersTransmitter top panel Components of the Transmitters Receivers Receiver front panelReceiver top panel Indicators Function Button Reset Button Edid CopyInstallation InstallationAdvanced Configuration ConfigurationConfiguration Basic Configuration Accessing through Serial Accessing through Telnet Advanced Commands Advanced CommandsAdvanced Commands Advanced IP Commands COM1 PuTTY screenAdvanced Multicast IP Configuration Serial Extension TransmitterReceiver Options controlling local serial lines Setting up Telnet extension using a Telnet protocol Telnet ExtensionTurning off line echo and local line editing Accessing the Transmitter without an IP Address Accessing the Web InterfaceAccessing the Web Interface Setup screen without IP address Web setup screen with IP address Video Wall Setup Video Wall FeaturesVideo Wall Features Basic Setup screen Number to the connected monitor Shows the Advanced Setup screen. -2 describes its components Target Show OSD checkbox Advanced Commands screen Row Position Contacting Black Box TroubleshootingTroubleshooting Problem/Solutions Shipping and Packaging Appendix Connector Pinouts Appendix. Connector PinoutsChapter About Black Box