Connections at the remote module
1 Place the remote module adjacent to the user location.
2 Attach the lead from the video monitor to the video out socket on the remote module.
TE
REMO
®
3Attach the leads of up to four USB devices (two of which are usually a keyboard and mouse) to the sockets located adjacent to the video output connector.
TE
REMO
®
®
contents
To video monitor
[Dual VGA variant only] Optionally attach the lead from a second video monitor to the upper video out socket on the remote module.
To secondary video monitor
R
®
B
A
To USB devices, |
|
e.g. keyboard, | See the Important note on page 5 |
mouse, etc. |
[MS2 variant only] Note: When connecting four USB devices to the unit, ensure that their total power requirements do not exceed 1700mA (1.7A). The USB standard states a maximum allowable current draw of 500mA (0.5A) per device, although most devices remain well below this limit - USB keyboards and mice typically require 100mA. Each X50 contains a self- resetting fuse that will prevent damage by shutting down the unit if the total power draw becomes excessive.
4 [Dual VGA variant only] Optionally | REM | |
attach a serial device lead to the | ||
® | ||
male serial connector on the |
| |
remote module. | B | |
A |
To RS232 serial device