![](/images/new-backgrounds/1105478/10547823x1.webp)
Connecting the Projector
Connecting the Projector
Connecting the Projector to a Computer
In this configuration, the projector displays the images from your computer’s screen. This is the configuration to use to project a presentation from your computer.
VGA Connector
VGA Cable
Computer In Connector
1.Make sure the projector and computer are turned off.
2.Connect one end of the VGA connector to the VGA port on the computer.
3.Connect the other end of the VGA cable to the Computer In port on the back of the projector.
4.Plug the power cord into the projector and then into an electrical outlet.
5.Turn on the projector first, and then the computer.
6.If you don’t see an image, or if you have multiple video sources connected to the projector simultaneously, press the Source button on the projector’s control panel, or remote control, to switch to the input source.
NOTE: Your DP 820 projector works best when the computer screen resolution is set to 800 x 600.
Xerox DP 820 User’s Guide | 7 |