Connecting the Projector
Connecting the Projector to an HDTV Video Source
The typical connection for an HDTV Video source is an HDTV digital tuner.
NOTE: Connecting to an HDTV Video Source requires the optional VGA to HDTV Cable. Please see your retailer where you purchased the projector for the optional cable.
Computer In Port
VGA to HDTV Cable
Audio Cable
1.Make sure the projector and video source device are turned off.
2.Plug the VGA end of the VGA to HDTV cable into the Computer In port on the back of the projector.
3.Plug the three connectors on the other end of the cable into the corresponding
4.Plug the red and white connectors on the Audio cable into the corresponding red and white ports on the HDTV device. Then plug the other end of the cable into the projector’s Audio port.
5.Plug the power cord into the projector and then into an electrical outlet.
6.Turn on the projector first, and then the HDTV device.
7.If you don’t see an image, or if you have multiple video sources connected to the projector simultaneously, press the Source button on the projector’s control panel, or remote control, to switch to the input source.
10 | Xerox DP 820 User’s Guide |