Xerox LX manual Loading Booklet Maker Staples

Page 10

Loading Booklet Maker Staples

Loading Booklet Maker Staples

If the optional Booklet Maker is installed, a message appears on the touch screen when the unit runs out of staples. When the message is displayed, load a new staple cartridge into the Booklet Maker. The Booklet Maker contains two staple cartridges.

Make sure that the machine has stopped, and open the side cover of the finisher.

Move the Booklet Maker Staple Cartridges so that both Staple Cartridges are easily accessible.

Hold the tabs on both sides of the booklet staple cartridge and pull the cartridge out of the Booklet Maker.

Hold the tabs on both sides of the new booklet staple cartridge, and insert it into the original position until it clicks.

NOTE: If you have trouble inserting the cartridge, make sure that the staples in the cartridge are properly in place.

1-8

Office Finisher LX - User Guide

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User Guide Page Table of Contents Product Overview Booklet Maker Copy Output Screen Copy Output ScreenInstalling the Tray Attachment Loading Staples in the Automatic Stapler Loading Staples in the Automatic Stapler Loading Booklet Maker Staples Loading Booklet Maker Staples Clearing Staple Jams Clearing Staple Jams in the Automatic StaplerClearing Staple Jams Clearing Staple Jams in the Booklet Maker Stapler Clearing Staple Jams Clearing Paper Jams Office Finisher LX Top Cover JamsOffice Finisher LX Transport Cover F Jams Booklet Maker Paper Jams Emptying the Hole Punch Waste Container
Top Page Image Contents