Xerox LX manual Loading Staples in the Automatic Stapler

Page 9

Loading Staples in the Automatic Stapler

Pinch both sides of the empty staple case with your fingers, and remove the staple case from the cartridge.

Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.

Hold the staple cartridge by the orange lever, and insert it into the finisher until it clicks.

Close the front cover of the finisher.

NOTE: If the front cover is not completely closed, a message will appear and the machine will not operate.

Office Finisher LX - User Guide

1-7

Image 9

Contents User Guide Page Table of Contents Product Overview Booklet Maker Copy Output Screen Copy Output ScreenInstalling the Tray Attachment Loading Staples in the Automatic Stapler Loading Staples in the Automatic Stapler Loading Booklet Maker Staples Loading Booklet Maker Staples Clearing Staple Jams in the Automatic Stapler Clearing Staple JamsClearing Staple Jams Clearing Staple Jams in the Booklet Maker Stapler Clearing Staple Jams Office Finisher LX Top Cover Jams Clearing Paper JamsOffice Finisher LX Transport Cover F Jams Booklet Maker Paper Jams Emptying the Hole Punch Waste Container