Xerox XE60, XE80, XE82 Copying While Printing, On-line/Off-line Button, Power Saving, Shut-off

Page 30

Copying While Printing

In order to perform a copy job while the machine is printing:

1.Set up the copy job while the machine is printing.

2.Press Start. The current page will finish printing, then the copy job will start.

3.When you complete the copy job, the factory preset is 1 minute before it reverts to print mode or touch the On-line/Off-line button to take it back to print mode. The machine will resume printing if pages are pending.

On-line/Off-line Button

Alternates between the On-line and Off-line status

The On-line/Off-line button can be pressed to interrupt a print job to run a copy job. When the copy job is complete, touch the On-line/Off-line button to take it back to print mode or it will revert to print mode automatically after 1 minute.

When the light is on printing is in progress. When the light is off there is no communication to or from the PC. When the light is blinking data is being received from the PC.

Power Saving

For assistance in changing the preset values refer to Programmable Features.

Power Reductions automatically reduce power consumed by the WorkCentre when the WorkCentre has not been used for a set period of time. There are two modes of power reduction; Power Save, and Power

Shut-off.

Power Save – In this mode, the fuser is maintained at a lower heat level, thereby saving power. The Ready Indicator will flash and the other indicators will remain on. To copy from Power Save select the desired features and press Start. The copies will be made automatically.

Power Shut-Off– This mode saves more power than the Power Save Mode, but requires more time before copying can begin. When the copier enters the power shut-off the Ready Indicator will flash and the other indicators will turn off. To copy from the power shut-off , press the Start button, then, select the desired features and press Start again. The copies will be made automatically.

21

Page 29 Page 31
Image 30
Page 29 Page 31
Contents WorkCentre XE Series XE60/62/80/82 FCC Compliance in the USA EME Compliance in CanadaEnergy Star XE80 series Its Illegal USACanada Table of Contents Xerox Printer Services Program Status Monitor Supplies ServiceIntroduction InformationSafety Notes SymbologyManual Conventions Safety Notes IiiSafety Notes WorkCentre Features Fault indicators and error message displayZoom R/E ratio range 50 to 200% Unpacking the WorkCentre Removing the CardboardRemoving the Shipping Tape Removing the Shipping Screw Installing the Paper Tray Paper Output SupportRemoving the Protective Paper from the Drum Cartridge Installing the Toner Cartridge Page Getting To Know Your WorkCentre Installation RequirementsConnecting the Parallel Cable XE80, XE82 only Connecting the Power CordPaper Specifications Selecting MediaLoading Media Paper TipsIf copying onto an envelope Copy Quality Copy/Print FeaturesControl Panel Copy ContrastReduction/Enlargement Indicators forPaper tray, jams, toner and drum cartridge replacement Unit buttonsCClear Ready Indicator light StartOn-line/Off-line Button XE80, XE82 only Message displayProgrammable Feature Settings 0 7, Customizing Your WorkCentreMinutes Programmable Features ChartSeconds 100%Nominal MinuteOff Copying a Copying Oversized DocumentsTwo-Sided Copying On-line/Off-line Button Power SavingCopying While Printing Shut-offAuto Clear Clearing Paper Jams At the Paper TrayE1 Jam E2 Jam Inside the WorkCentrePaper Exit Area E3 JamWorkCentre Fault Codes Fault Code Customer ActionProblem Solving Auto Page Printer Driver Software Installation XE80, XE82 RAMInstallation for Windows 3.1x and Windows NT 4.0 or Ensure that the computer and the WorkCentre are turned offXerox Printer Services Program Status Monitor To use the Status MonitorTo use Status Monitor Help Open Program Manager Double click Status MonitorDouble click Status Monitor Help Displaying the Driver Properties dialog from an application WorkCentre XE Properties Printer DriverTo use Status Monitor Options Windows 95, 98 and NTDisplaying the Properties dialog from the Start Menu WindowsProperties Tabs On-Line HelpCreating WorkCentre XE Floppy Disk Installation Diskettes Windows 95, Windows 98 and Windows NTCleaning the WorkCentre Cleaning the OutsideCleaning the Document Glass and Cover Cleaning the Drum Cartridge Repacking the WorkCentre Storage/TransportationConsumables Copy/Print CountToner Cartridge Yield Storage Replacing the Toner CartridgeDrum Cartridge Life Replacing the Drum CartridgePage WorkCentr XE80 Appendix Warranty Proof of Purchase If you have a problem with your unitWhat the warranty does not cover How is a replacement obtained?How is warranty repair service obtained? What must you do?Replacement and repair are your only remedies Service after your three year warranty expires

XE82, XE62, XE80, XE60 specifications

The Xerox XE60, XE80, XE62, and XE82 are a series of multifunction printers that showcase the company's commitment to innovation and reliable printing solutions. Each model comes equipped with a range of features tailored to meet the diverse needs of businesses, making them suitable for both small offices and larger enterprises.

Starting with the Xerox XE60, this model is known for its efficient performance and compact design. It features high-speed printing capabilities, offering up to 60 pages per minute, which significantly enhances productivity in busy office environments. The XE60 employs advanced LED technology for quality imaging, ensuring sharp and vibrant prints. Additionally, it supports a range of media types, including envelopes, labels, and glossy paper, making it versatile for various tasks.

Moving to the XE80, this model steps up the performance with similar high-speed printing but adds functionalities such as duplex printing, allowing for automatic two-sided printing and reducing paper consumption. The XE80 is equipped with a user-friendly touchscreen interface, streamlining the user experience and allowing for easy navigation of settings and tasks.

The Xerox XE62, suitable for medium-sized businesses, combines productivity with advanced security features. It includes secure printing options, ensuring that sensitive documents remain protected until they are retrieved by authorized personnel. The XE62 also enhances connectivity with mobile printing capabilities, allowing users to print directly from their smartphones or tablets.

Next in the lineup is the XE82, which showcases enhanced color printing capabilities, making it an ideal candidate for businesses that require high-quality graphics. The XE82 utilizes advanced color calibration technologies to maintain consistency and accuracy across prints. It supports a variety of file formats, ensuring compatibility with different software applications.

All models in this series are designed with energy efficiency in mind, reducing the carbon footprint while delivering high volumes of prints. They come equipped with various finishing options, such as stapling and hole punching, catering to the needs of organizations that require professional-looking documents.

In conclusion, the Xerox XE60, XE80, XE62, and XE82 are robust and reliable multifaceted printers that provide superior performance, security features, and versatility. With their advanced technologies, they cater to a wide range of printing needs, making them an excellent investment for businesses aiming to enhance their workflow efficiency.
Top Page Image Contents