Xerox XE80, XE82, XE60, XE62 manual Auto

Page 36

Problem

Suggested Solution

The three trouble

The machine is in the program mode. Press the

indicators are flashing

Copy Quality mode button to exit.

in the copier diagram.

 

 

Auto

Jam Drum Toner

 

 

 

Frequent copy paper

Fan the stack of paper, then turn it over in the

jams.

tray.

 

Replace paper in paper tray with a fresh supply.

 

Check/adjust paper guides.

 

Ensure that the paper is the proper paper

 

weight. 20 lb / 80 gsm bond paper is

 

recommended.

 

Check for copy paper or pieces of copy paper

 

remaining in the copier after a paper jam has

 

been cleared.

 

If copying onto envelopes, insert the envelopes

 

so that the flap is closed and there is a small

 

1/32” (1mm) gap between the left edge of the

 

envelope and the paper guide.

All of the page is blank.

The toner cartridge may be empty. This is

Part of the page is

indicated by the toner indicator light. Try

removing the toner cartridge from the machine

blank.

and shaking it from side to side to redistribute

 

 

the toner.

 

Make sure that the originals are face down on

 

the document glass.

 

The reduce/enlarge setting may not be set

 

correctly.

 

The paper may be damp, try putting in fresh

 

paper.

Back of the copy/print is

Copy a few blank pages to clean the pressure

dirty.

roller.

27

Page 35 Page 37
Image 36
Page 35 Page 37
Contents WorkCentre XE Series XE60/62/80/82 FCC Compliance in the USA EME Compliance in CanadaEnergy Star XE80 series Its Illegal USACanada Table of Contents Xerox Printer Services Program Status Monitor Service IntroductionSupplies InformationSafety Notes SymbologyManual Conventions Safety Notes IiiSafety Notes WorkCentre Features Fault indicators and error message displayZoom R/E ratio range 50 to 200% Unpacking the WorkCentre Removing the CardboardRemoving the Shipping Tape Removing the Shipping Screw Installing the Paper Tray Paper Output SupportRemoving the Protective Paper from the Drum Cartridge Installing the Toner Cartridge Page Getting To Know Your WorkCentre Installation RequirementsConnecting the Parallel Cable XE80, XE82 only Connecting the Power CordPaper Specifications Selecting MediaLoading Media Paper TipsIf copying onto an envelope Copy/Print Features Control PanelCopy Quality Copy ContrastIndicators for Paper tray, jams, toner and drum cartridge replacementReduction/Enlargement Unit buttonsReady Indicator light Start On-line/Off-line Button XE80, XE82 onlyCClear Message displayProgrammable Feature Settings 0 7, Customizing Your WorkCentreProgrammable Features Chart SecondsMinutes 100%Nominal MinuteOff Copying a Copying Oversized DocumentsTwo-Sided Copying Power Saving Copying While PrintingOn-line/Off-line Button Shut-offAuto Clear Clearing Paper Jams At the Paper TrayE1 Jam Inside the WorkCentre Paper Exit AreaE2 Jam E3 JamWorkCentre Fault Codes Fault Code Customer ActionProblem Solving Auto Page Printer Driver Software Installation XE80, XE82 RAMInstallation for Windows 3.1x and Windows NT 4.0 or Ensure that the computer and the WorkCentre are turned offXerox Printer Services Program Status Monitor To use the Status MonitorTo use Status Monitor Help Open Program Manager Double click Status MonitorDouble click Status Monitor Help WorkCentre XE Properties Printer Driver To use Status Monitor OptionsDisplaying the Driver Properties dialog from an application Windows 95, 98 and NTDisplaying the Properties dialog from the Start Menu WindowsProperties Tabs On-Line HelpCreating WorkCentre XE Floppy Disk Installation Diskettes Windows 95, Windows 98 and Windows NTCleaning the WorkCentre Cleaning the OutsideCleaning the Document Glass and Cover Cleaning the Drum Cartridge Repacking the WorkCentre Storage/TransportationConsumables Copy/Print CountToner Cartridge Yield Storage Replacing the Toner CartridgeDrum Cartridge Life Replacing the Drum CartridgePage WorkCentr XE80 Appendix Warranty Proof of Purchase If you have a problem with your unitHow is a replacement obtained? How is warranty repair service obtained?What the warranty does not cover What must you do?Replacement and repair are your only remedies Service after your three year warranty expires

XE82, XE62, XE80, XE60 specifications

The Xerox XE60, XE80, XE62, and XE82 are a series of multifunction printers that showcase the company's commitment to innovation and reliable printing solutions. Each model comes equipped with a range of features tailored to meet the diverse needs of businesses, making them suitable for both small offices and larger enterprises.

Starting with the Xerox XE60, this model is known for its efficient performance and compact design. It features high-speed printing capabilities, offering up to 60 pages per minute, which significantly enhances productivity in busy office environments. The XE60 employs advanced LED technology for quality imaging, ensuring sharp and vibrant prints. Additionally, it supports a range of media types, including envelopes, labels, and glossy paper, making it versatile for various tasks.

Moving to the XE80, this model steps up the performance with similar high-speed printing but adds functionalities such as duplex printing, allowing for automatic two-sided printing and reducing paper consumption. The XE80 is equipped with a user-friendly touchscreen interface, streamlining the user experience and allowing for easy navigation of settings and tasks.

The Xerox XE62, suitable for medium-sized businesses, combines productivity with advanced security features. It includes secure printing options, ensuring that sensitive documents remain protected until they are retrieved by authorized personnel. The XE62 also enhances connectivity with mobile printing capabilities, allowing users to print directly from their smartphones or tablets.

Next in the lineup is the XE82, which showcases enhanced color printing capabilities, making it an ideal candidate for businesses that require high-quality graphics. The XE82 utilizes advanced color calibration technologies to maintain consistency and accuracy across prints. It supports a variety of file formats, ensuring compatibility with different software applications.

All models in this series are designed with energy efficiency in mind, reducing the carbon footprint while delivering high volumes of prints. They come equipped with various finishing options, such as stapling and hole punching, catering to the needs of organizations that require professional-looking documents.

In conclusion, the Xerox XE60, XE80, XE62, and XE82 are robust and reliable multifaceted printers that provide superior performance, security features, and versatility. With their advanced technologies, they cater to a wide range of printing needs, making them an excellent investment for businesses aiming to enhance their workflow efficiency.
Top Page Image Contents